The answer requires the average thickness and density of the asphalt.
To convert cubic meters of asphalt to tons, you need to know the density of the asphalt, which typically ranges from about 2,200 to 2,400 kg/m³. Multiply the volume in cubic meters by the density to get the mass in kilograms, then divide by 1,000 to convert to tons. For example, if the density is 2,300 kg/m³, then 1 cubic meter of asphalt would equal approximately 2.3 tons.
The answer depends on how deep you want the asphalt layer to be!
To convert 509 tons of asphalt concrete binder course to cubic meters, you need to know the density of the material. The density of asphalt concrete binder course can vary, but a common value is around 2.2 tons per cubic meter. Using this value, 509 tons would be approximately 231.36 cubic meters.
To calculate the weight of asphalt in a square meter that is 50 mm thick, first convert the thickness to meters (0.05 m). The density of asphalt typically ranges from 2,200 to 2,500 kg/m³. Using an average density of 2,400 kg/m³, the weight of asphalt would be approximately 120 kg per square meter. This is equivalent to 0.12 tons per square meter at that thickness.
Tons and square meters are units for different physical quantities (weight and area), so they cannot be directly converted from one to the other. To convert tons to square meters, you need information about the density of the material in question. Multiplying the weight in tons by the density in kilograms per cubic meter can help you determine the volume in cubic meters, which can then be converted to square meters depending on the shape of the area you are considering.
the formula for figuring out asphalt is.. L x W x D x 110 / 9 / 2000 = tons of asphalt. Where: L = Length in feet W = Width in feet D = Depth in inches 110 = a average weight of a square foot asphalt 1 inch thick /9 = convert to square yards /2000 = convert weight to tons So.. 27707 x 3 x 110 / 9 / 2000 = 508 tons.
The weight of 1 square meter in tons depends on the material and its density. To calculate this, you would need to know the thickness of the material in meters and its density in tons per cubic meter. By multiplying the area (1 square meter) by the thickness and density, you can determine the weight in tons. For example, if you have a material with a density of 2 tons per cubic meter and a thickness of 0.1 meters, then 1 square meter would weigh 0.2 tons.
To calculate the volume of asphalt in 1 square meter at a thickness of 50 mm, you first convert the thickness to meters by dividing 50 mm by 1000 (since 1 meter is 1000 mm), which equals 0.05 meters. The volume would then be 1 square meter x 0.05 meters = 0.05 cubic meters. Asphalt typically has a density of around 2.3 tons per cubic meter, so the amount of asphalt in 1 square meter at 50 mm thick would be approximately 0.05 cubic meters x 2.3 tons/cubic meter = 0.115 tons.
Converting square meters to tons is not a direct conversion as square meters measure area, while tons measure weight. To convert square meters to tons, you need to know the density of the material in question. The formula for this conversion is: weight (in tons) = area (in square meters) x density (in tons per square meter). This calculation allows you to determine the weight of a specific area based on the material's density.
How to convert cubic meters to tons of armour rock with 2.7 specific
just multiply with 1.5471 factor to get in terms of tons 184x1.5474 =286.213tons srini can you please provide details of how 1.5474 figure came? The correct answere is 393.6 tonnes
You can't make such a conversion. 'Tons' is weight, 'metres' is length.