Any two legs of the 480V will give you 240 V Single phase.
I apologize for the wrong information here. A friendly member reminded me of the correct answer.
I stand corrected. Any two legs would be at 480 single phase. One leg to neutral will give you 277volts not 240 (408/1.73). You would need to install a step down transformer on the 277v line to achieve 240v.
The only way to change 480 volts to 240 volts is with a transformer. A wye connection of a 480 volt three phase system can get the voltage down to 277 volts, but it is not recommended to interchange these two voltages and the equipment that they operate on.
With a step-up transformer trio or motor-generator set.
You will need to use a transformer. This is because the phase voltage for a three-phase system with a line voltage of 480 V is 277 V.
You don't. These are two different types of electrical systems and the generation of these voltages requires different types of equipment when compared to each other.
Yes, if the motor is rated 240 volts 3 phase.There is such a thing as 240 volt 3 phase power.However if you are asking if you can use 240 volts single phase on a three phase motor, then the answer is no.
put double power batteries in
See Discussion Page
Some countries (Europe, Japan) use 120 volt systems. Australia uses 240 volt. One way of find out what voltage is used is to have a look at the pins on the appliances in the same area. 120 volt has round pins on the plug socket. 240 volt systems have 3 flat blades with rounded ends set at 30 degrees to each other around the centre of the socket If you are in the US and have a residential 120/240 volt system and want to know if you should use 120 to ground or 240 volts phase to phase. You should check the voltage rating of the equipment you are wanting to use. Never exceed the voltage rating.
Electronic technician will convert in no time. You need 240v power transformer in place of same wattage 120V. Super easy.
No. The 1-phase 240 setting on your computer's power supply is for the 240V wall outlets in other countries. The 240 outlets in your home are 2-phase 240.
All my experience with rotary phase converters have been in converting 240 volt single phase into 240 volt three phase. They all were hard wired into their respective systems, so my answer is no.
Yes, if the motor is rated 240 volts 3 phase.There is such a thing as 240 volt 3 phase power.However if you are asking if you can use 240 volts single phase on a three phase motor, then the answer is no.
Yes
Question is incorrect. in a 240 Volt single phase circuit, how can you have A phase and B phase?
put double power batteries in
no
A single phase 600 to 240 Volt transformer using two phases of the three phase primary.
No. You need a 3-phase supply that matches the voltage and current rating of your appliance.
See Discussion Page
No...that's too much voltage, and 277v is normally three-phase power.
only way to convert from 3 phase to 240 would be to change the electric motor on the compressor