0
You don't.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How does 50hz and 60hz differ from one another?
ONE THING FOR SURE THERE IS NO CHANGE IN VOLTAGE IF SAME EQUIPMENT WE ARE TALKING ABOUT. THE ISSUE HERE IS THE CHANGING LOAD FREQUENCY 60HZ TO 50HZ OR VICE VERSA. FOR EXAMPLE THE MOTOR HORSEPOWER AND R.P.M. WILL BE APPROXIMATELY 90 AND 83 PERCENT OF THE NAMEPLATE SPECIFICATIONS, ALSO THE FULL LOAD RUNNING TORQUE WILL INCREASE APPROXIMATELY 8 PERCENT IF USED FROM 60HZ TO 50HZ.
Hi I'm a barber. can i buy a transformer that can give an output of 120V and at 60HZ in England. Its for my clippers and trimmers. Is there such thing?
You can get a transformer that converts the UK's 230V power to 120V, but you cannot get a transformer that will convert from 50Hz to 60Hz. Often, US equipment can work, except that they will work hotter and less efficiently on the 50Hz power. Consult your clipper and trimmer documentation - you may find that it will work just fine on 50Hz.
If you run fan on 50hz instead of 60hz what will happen?
The fan will spin slower, attempt to pull more current than it would at 60 Hz, and may therefore overheat (or blow a breaker).
How will work motor 460V 3ph 60Hz at 380V 3ph 50Hz power net?
It will not work at all.
What is impact ampere in 50Hz motor connected to 60Hz?
What effect will be there on the motor (Induction) output power when a 100kW 50hz motor is connected to a 60hz power supply.
How can you convert a 220v 50hz generator to a 220v 60hz?
you can't
How can you convert US 120V or 240V circuit into a single phase 240V circuit to use on a European appliance?
The voltage isn't a problem, you can run 220 from your house and use that to run a European appliance, the problem is whether the appliance is dependant on line HZ. European is 50HZ and US is 60HZ. If the appliance specifies 220/50HZ, it will probably give you trouble here. If it says 220V/50 or 60HZ
Is majora's mask Pal in 60Hz?
No 50Hz
Can a 230V 50Hz Rice Cooker used in 220V 60Hz circuit?
Most likely, yes. Most devices has been manufactured with an idea that they will be used in areas where the supply power frequency is 50 or 60Hz.
60Hz has higher power than 50Hz?
yes
What is the difference between 50Hz and 60Hz?
10HZ. Enjoi!
How does 50hz and 60hz differ from one another?
ONE THING FOR SURE THERE IS NO CHANGE IN VOLTAGE IF SAME EQUIPMENT WE ARE TALKING ABOUT. THE ISSUE HERE IS THE CHANGING LOAD FREQUENCY 60HZ TO 50HZ OR VICE VERSA. FOR EXAMPLE THE MOTOR HORSEPOWER AND R.P.M. WILL BE APPROXIMATELY 90 AND 83 PERCENT OF THE NAMEPLATE SPECIFICATIONS, ALSO THE FULL LOAD RUNNING TORQUE WILL INCREASE APPROXIMATELY 8 PERCENT IF USED FROM 60HZ TO 50HZ.
Hi I'm a barber. can i buy a transformer that can give an output of 120V and at 60HZ in England. Its for my clippers and trimmers. Is there such thing?
You can get a transformer that converts the UK's 230V power to 120V, but you cannot get a transformer that will convert from 50Hz to 60Hz. Often, US equipment can work, except that they will work hotter and less efficiently on the 50Hz power. Consult your clipper and trimmer documentation - you may find that it will work just fine on 50Hz.
If you run fan on 50hz instead of 60hz what will happen?
The fan will spin slower, attempt to pull more current than it would at 60 Hz, and may therefore overheat (or blow a breaker).
Is 380 votage considered 50hz or 60hz?
Voltage has nothing to with frequency
How can you determine if an electric motor is 50HZ or 60HZ if there is no name plate?
One way would be to hook it up to a supply (by itself, with no load) and measure the speed with a contact tachometer. If your supply is 60Hz, and the motor speed corresponded to one of the standard motor speeds, it would be a pretty safe bet you had a 60Hz motor. If the speed was about 20% faster than a standard speed, the motor is probably a 50Hz motor. Or 20% slower if you were running a 60Hz motor on 50Hz For instance, a 1750 RPM 50Hz motor would spin at about 2100 RPM if you ran it on 60Hz.
Can you plug a 50hz 230v refrigerator to a 60hz 230v supply?
It is not advisable because the motor would run 20% faster which might produce damaging overpressure in the thermal circuit.
