answersLogoWhite

0

Assuming it's 90 v dc, get a 1.5 k-ohm resistor and an 82 k-ohm resistor. Put them in series across the supply, then there will be slightly over 1.5 v across the smaller resistor.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

Convert 15 amps 415v to kw?

To convert 15 amps at 415 volts to kilowatts, use the formula: kW = (amps x volts) / 1000. So, kW = (15 A x 415 V) / 1000 = 6.225 kW.


Convert the following 5 kilo volts to volts?

5000 volts


How do you Convert volts?

To what?


15 amp 110 volts is how many hp?

To calculate horsepower, you can use the formula: Horsepower = (Volts x Amps x Efficiency) / 746. Using 110 volts and 15 amps, and assuming 90% efficiency, the formula would be: (110 x 15 x 0.9) / 746 = 1.49 horsepower.


How many volts are running through a 90 volt system with a 6 ohms resister?

...90 volts...


How do you convert 15 feet by 6 feet to square feet?

15 x 6 = 90 sq ft


How can you convert amperes in to volts?

Amperes does not convert into volts they are two different values. Become familiar with the following formula and look at the relationships between the values. Volts = Amps x Resistance, Amps = Volts / Resistance and Resistance = Volts / Amps.


Is 17 watts 120 volts?

No. Watts = Volts x Amps Watts does not directly convert to volts.


What is the formula to convert amps to volts?

Amps and volts are two separate parts of power measurement and do not convert into each other. Multiplying amps times volts will give you the measurement of wattage.


How to convert watts to amps?

divide by volts


How many amps can handle in 12 volts a 600 volts 15 amps rated terminal bar?

The terminal strip's rating is 15 amps at 600 volts. It does not matter what the voltage is up to 600 volts, the maximum amperage allowed on the strip is 15 amps. It could be 15 amps at 12 volts or 15 amps at 600 volts or any voltage in between.


How do you convert 7620 volts to 240 volts?

To convert 7620 volts to 240 volts, you would need to use a transformer. The transformer would step-down the voltage from 7620 volts to 240 volts. The ratio of the turns on the transformer primary and secondary windings determines the voltage transformation.