Want this question answered?
Mutli speed furnace motors work on a basis of horse power verses work load. The motor actually contains multiple windings or you could say multiple motors. Each of the windings has a specific horse power rating at a given work load. For example, a 3 speed 1/2 horse power motor is actually 3 different horse powers. High is 1/2 hp - medium is 1/3 hp - low is 1/4 hp. As the motor horse power is decreased the motor will slow down under a given or constant work load. Technically there is no such thing as a multi speed motor but in actuality a multi horse power motor.
Richard Trevithick
A machinists V block in its simplest form is a block of metal with a V shaped (usually 90 degree V ) groove cut into it ( typically with a small square notch at the bottom of the V running its full length ) It is machined with high precision and usually hardened to prevent excessive wear. It is used to hold materials such as round bar securely while machining it. Imagine placing a round bar on a flat surface and trying to hold it while you try to drill a hole through it. the block may have other grooves to permit secure attachment to the work surface and also to accommodate a horse show shaped clamp to hold the work in in the V
Brake horse power is the amount of engine power which makes it to the wheels. This is different from the actual output at the engine.
Tractors normally have disel engines with 200 horse power or larger.
10
1 Horse Power (HP) = 33,000 ft lb per min or 550 ft lb per sec1 Metric HP = 32,550 ft lb per min or 75 kg-m per sec1 Boiler HP = 10 sq ft of boiler heating surface or 34.5 lb evaporation from and at 2120F.
33,475 btu's in a boiler horse power
How do you convert horse poop to energy?
Iron Horse - 1966 Consignment Betsy the Boiler 2-2 was released on: USA: 23 September 1967
50,000 pounds per hour how much horse power
Horse manure
very hard to convert, about 2.5-3.5hp per 100 cc in mowers
9 HP
The process would need to be similar to making a horse from a mule and a cow.
hippopatamus
Dirt sand and clay