You can't-lb per cubic foot is a measurement of pressure, tonnes is measure of weight. You could convert Ib per cubic foot to tonnes per cubic foot or more usually, gram per cubic centimetre but not lb per cubic foot to tonnes
To convert 2.66 tons per cubic meter to tons per cubic feet, you first need to convert cubic meters to cubic feet. There are approximately 35.3147 cubic feet in 1 cubic meter. Once you have the conversion factor, multiply the given value (2.66 tons per cubic meter) by the conversion factor to get the equivalent value in tons per cubic feet.
1.77 US tons per cubic meter.
To convert tons to cubic feet (cft), you need to know the density of the material in question. The formula for converting tons to cubic feet is: cubic feet = (tons / density). For example, if you have 2 tons of a material with a density of 100 pounds per cubic foot, the conversion would be: cubic feet = (2 tons / 100 lb/ft^3) = 0.02 cubic feet.
Multiply tons by 1,529.11 to get pounds per cubic yard:* 3.3 x 1,529.11 = 5,046.063 pounds per cubic yard
To convert ounces per cubic inch to pounds per cubic foot, you can use the following conversion factors: 1 pound = 16 ounces 1 cubic foot = 1728 cubic inches First, convert ounces to pounds by dividing by 16. Then, convert cubic inches to cubic feet by dividing by 1728. Multiply the two conversion factors to get the final result in pounds per cubic foot.
The density of aluminum is approximately 0.098 pounds per cubic inch. To convert this to pounds per cubic foot, you would first convert cubic inches to cubic feet (1 cubic foot = 1728 cubic inches) and then multiply by the density in pounds per cubic inch. Therefore, the density of aluminum in pounds per cubic foot is approximately 169 pounds per cubic foot.
The conversion is different depending on what substance you are using. You need to know the density of the material you are using. For instance, and this is from Reade.com; Earth, moist, excavated - 90 pounds/cubic foot Earth, wet, excavated - 100 pounds/cubic foot Multiply the volume in cubic feet by the above number, and you will get pounds. Read more: below
It could be pounds per cubic inch, or pounds per cubic foot, or tons per cubic yard. The only substance I know in fps is water which is 62.4 pounds per cubic foot.
To convert cubic inches to tons, you first need to know the material's density. For example, if you're converting water, 900 cubic inches is approximately 0.32 tons, since water has a density of about 62.4 pounds per cubic foot. However, for different materials, the conversion will vary based on their specific densities. You can use the formula: weight (in tons) = volume (in cubic inches) × density (in pounds per cubic inch) / 2000.
1 cubic yard is 27 cubic feet, so 3 cubic yards is 81 cubic feet. At 125 lb per cubic foot, that much topsoil would weigh 10,125 lb. At 2000 lb per ton, that converts to 5.0625 tons (if we assume complete precision of all the numbers - if not, then we would be limited to 1 digit of precision because the 3 in 3 cubic yards is only precise to 1 digit. In that case we would have to round the answer off to be 5 tons)
1ton=1000kg 1kg=1000gm 1ton=1000000gm
There are 1728 cubic inches in 1 cubic foot. To convert cu ft to cu in, multiply cu ft by 1728 (cu in per co ft).1,728 cubic inches per cubic foot.