0
turn it on and start cutting
What else can I help you with?
What would excessive drag lines indicate when oxy-fuel cutting?
Excessive drag lines during oxy-fuel cutting indicate that the cutting torch is being moved too slowly or at an incorrect angle, resulting in molten metal being dragged along the cut. This often leads to a rougher cut surface and increased heat input, which can cause warping or distortion of the material. Additionally, it may signal that the cutting flame is not properly adjusted, potentially leading to inefficient cutting and poor-quality results. Adjusting the speed and angle of the torch, as well as ensuring optimal flame settings, can help minimize drag lines.
How hot does rocket fuel burn?
6,300 degrees fahrenheit which is the same temperature as the oxy-acetylene cutting torch flame and in fact the oxy-acetylene cutting torch flame looks exactly the same as the rocket engine flame. Vincent Majerowicz
Which color hoses to be used in oxy acetylene flame cutting?
Red for the combustible gas (Acetylene - MAPP - Propane), green for the Oxygen. All Oxy-fuel torches use these hose colors.
What is the temperature of a neutral flame on a cutting torch?
5720 F ref. Victor Equipment Co. booklet OXY-FUEL Welding ,Cutting , and Heating Guide c.1996
What are the principles of thermal cutting?
ask jon simpson hes gay enough to anwser it .
How is oxygen used used in welding?
Oxygen is used in welding to increase the burn rate of the fuel gas, such as acetylene, in the oxy-fuel welding process. The oxygen reacts with the fuel gas, creating a high-temperature flame that is used to melt and join metal together. Additionally, oxygen is used in oxy-fuel cutting to aid in the combustion process, resulting in a clean cut through metal.
What has the author D Howse written?
D. Howse has written: 'Vortex generator nozzles for oxy-fuel cutting of C-Mn steel'
The cutting process results in oxides that mix with molten iron and produce?
Oxy-fuel welding and cutting process results in oxides that mix with the molten iron.
What are the various types of thermal cutting equipment?
Various types of thermal cutting equipment include oxy-fuel cutting torches, which use a flame fueled by oxygen and gas to cut metals; plasma cutting machines, which utilize ionized gas (plasma) to melt and sever materials; and laser cutting systems, which employ focused laser beams for high-precision cuts. Additionally, water jet cutting, although not strictly thermal, uses high-pressure water mixed with abrasives to cut through materials without generating heat. Each type has specific applications depending on the material and desired cutting precision.
What is the color black hose represent in cutting welding?
In cutting and welding, a black hose typically represents the fuel gas line, most commonly used for acetylene. This hose is essential for providing the fuel needed for oxy-fuel cutting and welding processes. Proper identification of hoses is crucial to ensure safety and prevent accidents associated with gas leaks or incorrect connections.
How do you remove bushings out of a lower control arm from a 1980 Chevrolet?
I usually cut them out with oxy/acet cutting torch. When you press in the new ones make sure you don't bend the ears together.
Can you light a fire in space?
Yes- BUT- you need a fuel AND an oxidizer, since outer space is a vacuum (no air= no oxygen). Gasoline alone would not burn, but an oxy-acetylene cutting torch WOULD burn- since it has its own fuel and oxygen.
