Pull the fuse
Where is the abs module located on a 2004 Chevy Tahoe
how do you replace a wheel bearing assembly on the left side of a 2007 chevy tahoe with 4wd and abs brakes
if you are braking under 15 mph abs does not activate or it does not have 4-wheel abs
You have a problem with the abs system. Once the problem is fixed the light will reset itself.
The abs light is on because you have a problem with the system and it will remain on until the problem is fixed.
rear abs sensor is in the transfer case in the rear tailshaft there 2 sensors 1 is for the speedo and 1 for the abs
Not sure about a recall, but to temporarily deactivate it, you can pull the ABS fuse, which should be located under the hood.
No difference in the replacement procedure.
Likely cause is an electrical problem in the EBCM. Unfortunately it is replaced w/ the abs pump as they are one unit. Very pricey!
It is screewed into the top rear of the transfur case.
Why will my abs break light and seat belt light stay lite on the dash of a 2003 chevy Tahoe while the motor is running? Please help. Thank you.
95 Chevy Tahoe no rear brake have hard peddel bleed all the lines when i disconcet front line to abs i have rear brakes concet front line i have no rear but have front is my abs valve screwed up