Easiest way is to use an old brake pad and a C-clamp. Put the pad over the piston and crank the clamp. If you don't have an old pad, use a small piece of wood to cover the piston.
You need to turn the piston clockwise and it will slowly retract as you turn.
How to replace starter on a 95 G20 infiniti?
Yes. The rear bumper cover was the same on the Infiniti G20 from 1999-2002.
To retract the brake caliper piston on a G20 Infiniti, you'll need a brake caliper tool or a C-clamp. First, remove the caliper from the rotor by unbolting it, then position the tool or C-clamp over the caliper piston and gently turn or squeeze to push the piston back into the caliper housing. Ensure you do this slowly to avoid damaging the piston or seals. Finally, reassemble the caliper and check brake fluid levels before testing the brakes.
i need to locate knock sensor on a 2000 infiniti g20
my infiniti g20 needed trans fluid. I did that. then the linkage went out. so now what?
Need help to disarm the alarm on 1999 infiniti g20
fuses for a 94 chevy g20
the infiniti g20 does not use a belt,it uses a timing chain that does not need maintenance
1993 Infiniti G20 does not have a hydrolic clutch! It has a cable, that runs under the intake stuff.
I did a tune up on my 1993 infiniti g20 2.0 and now it wont start,what is the problem?
The 1994 infiniti G20 does not have a timing belt, thus you can't replace it even if you want to. The G20 has a timing chain and does not need changing ever!