Want this question answered?
cause its a gas
the boiling point of refrigerant in a refrigeration or air conditioning system determines the pressure of the low side of the system
2.4
The Evaporator is the part of a refrigeration system that absorbs heat. Its counterpart is the condenser which is used to remove heat that was absorbed in the evaporator.
at the metering device before the evaporator
When the refrigerant saturation temperature increases to 36 degrees F.
use recovery equipment to gain access to the system during testing
use recovery equipment to gain access to the system during testing
pressure in a refrigeration system is changed in the
use recovery equipment to gain access to the system during testing
The refrigeration system used in air conditioners with rotary compressor, the discharged gas is entered firstly into the doom of the compressor, while the system used with reciprocating and other compressors, it is admitted into the discharge tube. and are suction cooled. Why in rotary systems, the discharge refrigerant directly admit into the doom first.
use recovery equipment to gain access to the system during testing
cause its a gas
at the metering device before the evaporator
An evaporator in a refrigeration system works by passing warm air over it's coils.
the boiling point of refrigerant in a refrigeration or air conditioning system determines the pressure of the low side of the system
Requires instruments and knowledge of the refrigeration cycle. Casual observation of a system, won't allow you to properly determine if it's overcharged.