0
Pressure-temperature charts in refrigeration are used to determine the relationship between the pressure of a refrigerant and its corresponding temperature in a specific system. By referencing these charts, technicians can accurately diagnose issues, set proper system pressures, and troubleshoot problems. This helps ensure the system operates efficiently and effectively.
What else can I help you with?
Properties of superheated vapor R134a?
for English units, see this table http://energy.sdsu.edu/testcenter/testhome/Test/solve/basics/tables/tablesPC/superR134a-Eng.html (click on SI once there for SI units if needed). If you need higher pressure than 400psia or 16MPa, you will need the R143a superheated vapor chart, which I can't find online. You can find tables and charts in various thermodynamics textbooks. For example, Tables in "fundamentals of engineering thermodynamics" by Moran and Shapiro; or the chart by "SUVA/DuPont" is in the appendix of the "mechanical engineering reference manual" by Lindeburg.
Where do you find a book that shows all pressure points on the whole body?
You can find books on pressure points at your local bookstore or online retailers like Amazon. Look for books that specialize in acupressure, reflexology, or traditional Chinese medicine to find information on all pressure points in the body.
How long do you cook a whole turkey in a pressure cooker?
For a whole Turkey (10-12 lbs) you can brown it first, make sure it's on a trivet with 2 cups of water, for 40 minutes. Release pressure using the natural release method. For a larger turkey, a 20 lbs. for example, pressure cook for 1 1/2 hours. Keep the pressure at 15psi. More time charts at: http://missvickie.com/howto/times/timingframe.html Enjoy!
What is a synoptic chart?
Synoptic chart or map is the one that shows the meteorological conditions over an extended region for the particular time period. The other names for synoptic chart are, synoptic scale, large scale or cyclonic scale.
What is chart called?
A graphical representation of data is called a chart. It is used to visually showcase trends and patterns within the data to help make it easier to understand and interpret. There are various types of charts such as bar charts, line charts, pie charts, and scatter plots.
What is the condensing temperature for r404?
The condensing temperature for R404A refrigerant typically ranges from 100°F to 130°F, depending on the operating conditions of the refrigeration system. It is important to consult manufacturer's guidelines and pressure-temperature charts for accurate information.
What is a mini chart that fits inside a cell on Microsoft Excel?
No chart will fit inside a cell. You may be referring to embedded charts that are on worksheets where their data are.No chart will fit inside a cell. You may be referring to embedded charts that are on worksheets where their data are.No chart will fit inside a cell. You may be referring to embedded charts that are on worksheets where their data are.No chart will fit inside a cell. You may be referring to embedded charts that are on worksheets where their data are.No chart will fit inside a cell. You may be referring to embedded charts that are on worksheets where their data are.No chart will fit inside a cell. You may be referring to embedded charts that are on worksheets where their data are.No chart will fit inside a cell. You may be referring to embedded charts that are on worksheets where their data are.No chart will fit inside a cell. You may be referring to embedded charts that are on worksheets where their data are.No chart will fit inside a cell. You may be referring to embedded charts that are on worksheets where their data are.No chart will fit inside a cell. You may be referring to embedded charts that are on worksheets where their data are.No chart will fit inside a cell. You may be referring to embedded charts that are on worksheets where their data are.
How calculate the superheat?
Superheat is calculated by subtracting the saturation temperature of the refrigerant at a given pressure from the actual temperature of the refrigerant vapor. First, determine the saturation temperature corresponding to the system's pressure using refrigerant tables or charts. Then, measure the actual temperature of the vapor at the same point in the system. The formula is: Superheat (°F or °C) = Actual vapor temperature - Saturation temperature.
What is the term referring to music record rating lists?
The Charts*
How do you calculate the discharge superheat on a chiller?
To calculate the discharge superheat on a chiller, first measure the temperature of the refrigerant gas at the discharge line using a temperature sensor. Next, determine the saturation temperature of the refrigerant at the corresponding pressure in the discharge line using pressure-temperature charts. Subtract the saturation temperature from the measured discharge temperature to find the discharge superheat. The formula is: Discharge Superheat = Discharge Temperature - Saturation Temperature.
What information do the pressure cooker time charts provide for cooking with a pressure cooker?
Pressure cooker time charts provide recommended cooking times for various types of food when using a pressure cooker. These charts help users determine the appropriate cooking time needed to achieve desired results, such as tender meats or perfectly cooked grains, while using a pressure cooker.
Used to show the relationship of proportion of parts to a whole?
Percentages or fractions are two ways. You could also be referring to charts, particularly pie charts.
Where can one purchase blood pressure charts in bulk on a discount?
To purchase blood pressure charts in bulk on a discount I suggest you to go to pharmaprix or jean-coutu. They will advice you on the best product and with a reasonable price.
Do you need Excel to view in 3-D?
Excel provides 3D charts, if that is what you are referring to, but so do many other spreadsheet applications. So you do not have to have Excel to view 3D charts.
Name the lines drawn on charts linking points of equal barometric pressure.?
Isobars.
Will half inch black steel pipe hold twenty pounds of pressure at one thousand degrees?
yes it will because its way below its melting point.Better check the temperature / pressure relationship as temperature builds up so does the pressure. One has to check the charts and see what schedule the piping should be as schedule 40, 80 or 120 @ 1 PSI steam you have 213 deg etc you have to allow for the coefficient of expansion and contraction per inch of temperature change thus the wall thickness has to be considered
What should the reading for R-22 be?
The reading for R-22, a commonly used refrigerant, typically depends on the system's operating conditions, including temperature and pressure. Generally, at a temperature of 75°F (24°C), the corresponding pressure for R-22 is around 70-75 psi on the low side and 220-250 psi on the high side. However, it's important to refer to the manufacturer's specifications and pressure-temperature charts for accurate readings specific to your system. Always ensure proper safety precautions when handling refrigerants.
