0
Check it with a voltmeter or with a voltage detector.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Is a wire feed a mig or tig?
The wire feed welder is a MIG welder.
How do you tell which is the line wire and the load wire?
The line wire will be hot and carrying power when the breaker is on. The load wire will not be hot and will have no voltage on it until it is connected with the line wire.
Do you need 3-wire romex to feed bedroom ceiling box by electrical code?
No, you can feed it with a 2 wire Romex + ground. It depends on what is mounted on the ceiling. If it is just a light all you need is 2 wire + ground Romex. However if it is a fan/light and you want to control each one independant of the other you will need to use 3 wire Romex + ground. This is of course if you have 2 seperate switches. You would then connect the red wire to the blue light wire and the black wire to the black fan wire. If you use 2 wire Romex just connect the blue and black fan/light wire to the black wire in the ceiling box.
What is feeder wire?
The feed line is the cable or other transmission line that connects the antenna with the radio transmitter or receiver
How do you determine messenger wire size?
The messenger in triplex and quad is already determined by the wire size that is wrapped around it. It is the maximum span distance that you should find for the size of over head cable that is being used.
Is a wire feed a mig or tig?
The wire feed welder is a MIG welder.
What is a SuitCase wire feed or work wire used for?
One is a Miller Suitcase wire feed storage device that is used for feeding wire to an argon welding machine. Work wire is jewellery and pendants that are made from working wire into different shapes.
What is a engine control switch feed wire on a Chevy S 10 ignition system?
what is the engine control switch feed wire on a distributer
Which wire is the memory feed wire on a 1998 Ford Ranger XLT?
green one
What size wire do i need to feed a single phase V primary and a V secondary fed from a 150 amp circuit breaker?
Information is incomplete. You need to know the load in Watt or Kilowatt and the voltage on the secondary side to determine the load current, on which the size of the wire is designed.
What is the difference between a 1 wire and 2 wire alternator?
2 wire has a live wire to energise the field where as the single wire alternator self energises and does not need the powered feed.
When a live battery feed wire touches the metal frame shorting all electrical power out throughout the entire vehicle what is the problem that needs correcting?
insulate the 'live battery feed wire'. i.e.; electrical tape. Or, replace wire.
Which wire is positive and which wire is negative on 1998 4 liter grande Cherokee ignition coil?
The dark green/orange wire is the power feed.
What is the gauge of wire for a 13.8 dc power cords?
You need to know the current to determine the wire gauge.
Before you touch a wire in an appliance how should you make sure that it is NOT hot?
You can use a wire tester to determine if a wire is live. You can also touch the positive wire on the ground wire, if the wire produces a spark it is live.
Can you wire a 240 volt window ac from a 277 volt feed?
no
What colour wire is switched live feed on a car stereo?
Yellow
