there is a box under the steering wheel about the size of a pack of cigarettes you need to take it out then take out the horn under the hood it should be on the driver side you can cut the wire or take it out all together its held in by screws i had the same problem or you can just turn down the sensitivity on it
in the fuse box, find the controlling fuse, if the fuse handles only the alarm then pull it. There should be an inline fuse that can be disconnect. This way you can always put it back easily.
anonymously
i need to disable jeep factory alarm 1997 cherokee
== == We found it located in behind the right side of dash board, in behind the glove box. For our 1993 Jeep Grand Cherokee Laredo
The alarm system on your Jeep Grand Cherokee is controlled by a small, approximately 3 inch square box that plugs into wiring under your dash on probably the drives side towards the middle. It is black in color and is printed with the words "alarm module. If you unplug that the alarm system will be permanently disabled and starting issues may be resolved as well.
3574lbs
How do you change the orifice tube on 1997 grand Cherokee jeep with 5.2 v/8
on my 1993 jeep GCL i removed fuse 6 and 7 from the fuse box to disable my alarm i hope this helps
i need to disable jeep factory alarm 1997 cherokee
== == We found it located in behind the right side of dash board, in behind the glove box. For our 1993 Jeep Grand Cherokee Laredo
It is an integral part of the computer system and can not be removed.It is an integral part of the computer system and can not be removed.
Check this page out, and look at related articles. http://autorepair.about.com/library/faqs/bl903h.htm
no
the aftermarket alarm kit
The factory alarm can not be disabled, only repaired if malfunctioning.
where is the ac drain on 1999 jeep grand cherokee limited
The alarm system on your Jeep Grand Cherokee is controlled by a small, approximately 3 inch square box that plugs into wiring under your dash on probably the drives side towards the middle. It is black in color and is printed with the words "alarm module. If you unplug that the alarm system will be permanently disabled and starting issues may be resolved as well.
you close the hood all the doors and use the key and lock and the drivers door then reopen the drivers door
No such part.