Ford uses a quick connect fitting. You need the right size plastic release clip for the size line. It is a split plastic washer that goes around the line, you push it into the fitting and that releases the line. You can get a set of them for I think $6. Once you see the tool, it should make sense what it does and how to do it. Push the clip into the fitting with one hand and pull the line out with the other.
Go to Autozone and ask to borrow a tool set to remove Ford fuel line connectors.
You need to disconnect the fuel line, at the filter by the tank, and drop the fuel tank. Careful of the wiring to the pump.
where is the fuel filter on a 2002 ford explorer
where is the fuel reset in ford escape 2002
On a 2002 Ford Taurus : The electric fuel pump is inside the fuel tank
The electric fuel pump is inside the fuel tank
To remove the number 4 fuel injector on a 2002 3.8-liter Ford Windstar, first, disconnect the negative battery terminal to ensure safety. Then, remove the intake manifold, as access to the fuel injectors is limited. Once the manifold is off, disconnect the electrical connector from the injector and the fuel line. Finally, use a socket or wrench to remove the retaining clip and pull the injector out from the fuel rail.
The 2002 Ford Explorer runs on flex-fuel (unleaded/E85).
The 2002 Ford Explorer has a 22.5 US gallon fuel tank capacity.
# Disconnect negative battery cable # Raise truck and secure it # Remove the fuel tank # Disconnect the vapor hoses from the canister and remove the canister retaining nut then remove the canister
In the fuel tank.
On a 2002 Ford Explorer : The ELECTRIC fuel pump is INSIDE the fuel tank . It is installed through an access hole on the top of the fuel tank .