Use a software like pinnacle studio.
None. You need a FireWire / IEEE 1394 hub.
You should be able to obtain a Firewire DVD cable from virtually any retailer that stocks audio/video accessories and equipment.
The following instructions will work with any digital camcorder that has a Firewire port (including the TRV-310): To transfer digital video from your digital camcorder to your Mac, simply plug the camcorder into power, put it in playback mode, and use a 4-pin to 6-pin Firewire (also known as IEEE 1394a, or i.Link) cable to connect the IEEE 1394 / i.Link port on the camcorder to the Firewire port on the Mac. Once connected, launch iMovie on the Mac, move the switch underneath the preview pane to the camera icon (in iMovie HD and earlier), and import the footage.
First make sure firewire is enabled in bios, assuming firewire is integrated on your MB. If you have a FW card, make sure the drivers are properly installed.
The following instructions will work with any digital camcorder that has a Firewire port (including the TRV-310): To transfer digital video from your digital camcorder to your Mac, simply plug the camcorder into power, put it in playback mode, and use a 4-pin to 6-pin Firewire (also known as IEEE 1394a, or i.Link) cable to connect the IEEE 1394 / i.Link port on the camcorder to the Firewire port on the Mac. Once connected, launch iMovie on the Mac, move the switch underneath the preview pane to the camera icon (in iMovie HD and earlier), and import the footage.
The best camcorder to use for recording high definition is probably the type that uses built-in hard drives for storage. HD video requires a lot more space than regular video and these camcorders can store up to 240 gigabytes of video. By adding memory card technology to the hard drive camcorder, one would be prepared for emergencies in case the video goes pass hard drive capacity. The advantage of the hard drive camcorder is the ability to immediately transfer files to a computer for editing by using USB or FireWire connectivity.
MiniDV video is captured to a computer in real-time as it is played back on the camcorder. A Firewire DV card is by far the best to use, it was designed for video and has a vary high transfer rate, make sure your camera has firewire, a lot of time it is marked as DV out. You can also add a firewire card to your computer fairly easily. Search for 'PCI firewire card' for desktop computers and "PCMCIA firewire card' USB won't work because the transfer rate is not fast enough. Another option is to use a professional video transfer service. They use super high quality audio cables that connect miniDV decks to high quality video cards directly. This would get you the best quality. StashSpace.Com offers this transfer service for $6.95 a tape.
HAVi is the connection for controlling home audio and video hardware using the FireWire.
You will need to buy a firewire cable to connect from your camera to the computer. Make sure you know what kind of connections you need on each end before you purchase. You may need a 4pin to 6pin firewire cable or in my case, I needed a 4 pin to 9 pin cable.You have to make sure your computer is capable of receiving video via the firewire cable. You will also need to have a computer program that will recognize video and guide you through the process of capturing the video.
Well using a camcorder is pretty easy basically point at what you want to take a video of and press the REC(red) button. The hard part is trying to take a video of something that doesn't exist. You can point the camcorder into atticks and basements but the video is going to be VERY boring.
A camcorder is a portable consumer electronics device for recording video and audio using a built-in recorder unit. The camcorder contains both a video camera and a video recorder in one unit, hence its compound name. This compares to previous technology where an acquisition and recording devices would be separate.
Make sure the video is in a file format that is compatible with the camcorder. Connect the PC and camcorder with the USB connections, transfer the video to the file folder that comes up when the camcorder is connected to the computer.Ê