You fail at spelling and grammar.
how to change oil on JOHN DEERe GX 85
The way to drain gasoline from a Briggs and Stratton lawn mower is to take the oil cap off and drain the oil. From there, run a rubber hose into the drain and siphon the rest of the oil and gas out.
To drain oil from a lawn mower, first locate the oil drain plug underneath the mower. Place a container underneath to catch the oil. Remove the drain plug and let the oil drain completely. Once drained, replace the drain plug and refill the mower with fresh oil according to the manufacturer's recommendations.
To drain oil from a lawn mower without using a siphon, you can tilt the mower on its side and carefully pour the oil out through the oil fill tube or drain plug. Be sure to have a container ready to catch the oil and dispose of it properly.
To properly drain lawn mower oil, first, warm up the engine by running it for a few minutes. Then, locate the oil drain plug underneath the mower and place a container underneath to catch the oil. Remove the drain plug and let the oil drain completely. Once drained, replace the drain plug and refill the mower with the recommended amount of new oil.
Oil comes up through the head (top part of the motor) and leaks from the muffler.
To properly drain oil from a lawn mower, first, make sure the engine is cool. Locate the oil drain plug underneath the mower and place a container underneath to catch the oil. Remove the drain plug and let the oil drain completely. Replace the drain plug securely and refill the mower with the recommended type and amount of oil.
There is no oil drain on a 650 series lawn mower. You have to turn the mower over and drain the oil from the spout you put it in the engine. Make sure the gas tank is empty
Drain out the excess. Too much oil will damage the engine.
lawn mover
You generally don't "change" the oil in a lawn mower engine, you just periodically put more in. The lubrication system on small two-stroke engines doesn't recirculate oil, it mixes it with the fuel and uses it up.
The engine has a drain plug located on the engine block. Look closely and you will find it.