0
What else can I help you with?
What size is the oil drain plug on a 1993 Acura Legend?
The oil drain plug on a 1993 Acura Legend is 14mm x 1.5
How do you change transmission oil in Acura Integra LS 1988?
To change the transmission oil on a 1988 Acura Integra drain the older fluid by loosening the drain bolt. Wait until it is done drain and cap the hole. Insert new transmission fluid in the transmission reservoir.
Where is the radiator drain plug for a 1991 Acura Legend?
The radiator drain plug is on the bottom edge of the 1991 Legend. It looks like a wing nut and is on the drivers side.
Where is the transmission drain bolt on a 1994 Acura Integra?
behind front passenger tire
Where is the transmission drain plug on a 2002 Acura MDX?
the drain plug will be on the front side of the transaxle. and the fill plug will be right above it.
Where is the transmission fill plug on a 2001 Acura TL?
just above the drain plug on the tranny case. drain plug the lower bolt.
How do you replace the thermostat on a 91 Acura Legend coupe?
The way to replace the thermostat on a 91 Acura Legend Coupe is to drain the radiator and remove the throttle and cable box. Remove the top of the radiator hose and the bolts. The thermostat will be inside.
Where is the transmission drain plug on a 2003 Acura MDX?
The transmission drain plug on a 2003 Acura MDX is located on the bottom of the transmission pan. To access it, you'll need to raise the vehicle and remove any necessary undercarriage covers. The drain plug is typically a hex bolt, so using the appropriate size socket or wrench will allow you to drain the transmission fluid effectively. Always ensure to check the vehicle’s service manual for specific details and torque specifications.
Transmission drain plug on 2001 Acura CL?
The transmission drain plug on a 2001 Acura CL is typically located at the bottom of the transmission pan. To access it, you may need to raise the vehicle and ensure it's securely supported. Make sure to use the correct size socket to avoid stripping the plug. It's advisable to replace the washer on the drain plug during reinstallation to prevent leaks.
How do you remove a radiator on a 1991 Acura legend?
To remove the radiator from a 1991 Acura Legend, first, ensure the engine is cool and disconnect the negative battery terminal. Drain the coolant by removing the drain plug at the bottom of the radiator and disconnect the upper and lower radiator hoses. Next, remove any bolts securing the radiator to the support brackets, then carefully lift the radiator out of the engine bay. Don’t forget to also disconnect any electrical connections or transmission cooler lines if applicable.
Looking for the transmission drain plug on your 2001 Acura CL type s?
To locate the transmission drain plug on a 2001 Acura CL Type S, first ensure the vehicle is on a level surface and securely raised with jack stands. The drain plug is typically located on the transmission pan, which is situated beneath the vehicle, towards the center. Look for a hexagonal or square bolt on the bottom of the pan; this is the drain plug. Always consult the vehicle's service manual for specific details and torque specifications when working on the transmission.
How do you take off a 1990 acura integra GS manual transmission drain plug?
1/2 drive Ratchet
