If it is a anti-theft radio, it will say so on the face plate. If it says "CODE" and won't play, you will need a 5-digit code to enter, unique to your car. Ways to get this:
1. Don't bother going to a Honda dealership. They will just try to get you to pay a "technician" to do something you can do yourself.
2. Look around the car for places that list a 5-digit code: some have found it on the inside of the glovebox, sometimes on the outside left, others under the hood, in the center console, in the ashtray, etc.
3. If you have all your original paperwork etc. that came with the car, look in the "Service History" booklet, not the owner's manual. This will either have the code, or at least the stereo's serial #. Or check for a plastic card labeled "Anti-Theft Radio Identification Card", has both serial # and 5-digit code #.
5. If it's a 1999 or older Honda, pull the radio out of the dash, look for the stereo serial number on bottom or back of stereo, then call Honda and they can look it up with that and your VIN #. Kind of a pain.
6. If it's a 2000 or newer, you can get the serial number by holding down the 1 and 6 preset buttons and turning the radio on, then call Honda, etc.
Once you have the code, enter the 5 digit code with the station presets. You have a limited # of attempts to insert the code, so if you've been trying or a service technician has been trying random codes, it will lock up and not accept any code. If the radio locks up, run the radio for 1 hour and it will allow you to try again, or disconnect the negative battery terminal for 60 seconds and that will clear the lock on the radio. Then you canenter the code.
Just press 1 and number 6 button at the same time and your code number will come up, then enter the that number,when it request the code. Honda claims it does put this on their literaturer for security purposes.
You enter the code using the radio preset buttons.
how to enter radio code honda fit
Enter the code with the preset buttons on the radio.
If you are asking about the radio unlock code you enter it with the radio preset buttons.
Use the radio preset buttons to enter the code after turning the ignition on.
I assume you mean the radio code. If so, you enter it with the radio preset buttons.Call your Honda dealer because nobody seems to know how.
You enter the 5 digit code by pressing the radio preset buttons.
You enter the 5 digit code by pressing the radio presets. As there is no 8 on the radio presets the code cannot contain the number 8. To find out what your code actually is go to the Honda Owners website and register your Honda. After registering it you can get the code there by clicking Retrieve Radio/Navi code under quick links. http://owners.honda.com
Once you see code on the display use the preset buttons to enter the 5 digit code.
in order to get the radio code you must first take out the stereo and get the serial number off the back of the radio then call a Honda dealership with the VIN and proof of ownership and they can get you the code. You then enter the code using the preset buttons. GOOD LUCK!!
You have attempted to enter an incorrect radio security code 3 times and the radio is locked up. Simply turn the radio on and leave it on for 1 hour. The radio will unlock and then allow you to enter the correct code. If you do not know the code go to the honda owners website I will post a link to and sign up your Accord. There you can get the code for free.
You have to enter the radio code than came with the vehicle on a small plastic card. If you cannot find the code then go to the Honda Owner's link I will post and register your Honda. You can get the code there for free.
Power the radio, and then enter the anti-theft code using the preset numbers at the bottom of the radio. If the anti-theft code is unknown, contact Honda with the 17-digit vehicle identification number.