Want this question answered?
put a movie in 1. Press STOP twice on the remote 2. Enter: 26604 on remote 3. Press ENTER
2142 is the code you'll have to go into your menu under parental controls to enter it.
If its the code for the keyless remote entry, the buttons on the drivers door, The factory set code can usually be found on the right arm of the trunk hinge. Even it the code is changed, the code set at the factory (default) can still be used to unlock the door.
they will send the 5 digits code to my cellphone
You must find a specific code on your computer in iTunes. When you enter that code into your Apple Remote app, it should connect.
Press the button of what you want to program (cable,tv,or aux). Hold the set up button until your button of choice flashes twice. Enter your code (I had to enter a additional 1 to the beginning of my code). The button of choice should then flash once and it is now ready. I used this on a maxent 50' monitor
Use your remote to press disarm or enter the key provided by the factory.
I need the device code number to enter into my Dish DVR remote so the Harmon dvd will operate from that remote.
Enter the five digit factory-programmed code into the keypad. Press the 1-2 button immediately after the factory code has been entered, this must be pressed within five seconds. Enter your preferred five-digit personal code.
Try disconnecting from the battery the neutral cable for approx 11 minutes. Akhtar
I'm not a mechanic / technician but as far as I know if you change the RAP module ( remote antitheft personality module ) and the remotes then you would have a different FACTORY entrance code
On the keyless entry pad on the driver's door, you can change a personal code, but the factory code can't be erased To erase an existing personal code, enter the factory code and within 5 seconds press and hold the 1/2 button for at least 6 seconds - the factory code will still work. ---------------------------------------------------------------------------------------------------------- Choose a new personal code that doesn't use 5 digits in sequence or use the same button 5 times. Enter the factory code Within 5 seconds press the 1/2 button Within 5 seconds of pressing the 1/2 button enter your new 5 digit code, pressing each digit within 5 seconds of the previous digit. You can use the factory code or your personal code to unlock/lock doors