When the Acer screen is displayed during the initial power on, the system should tell you which key to press (different Acers may have a different keypress required to enter the BIOS setup). The most likely options are F1, F2, F10, F12, or Delete. You can also try pressing "Tab" on the Acer screen (on some systems, it will remove the Acer logo and show you the initial boot messages, including which key to press for setup).
I'm Pretty Sure That It's F8 or TAB When You Start Up.
It's just your computer.
The router will prompt the user for a response to enter setup mode.
Hibernate is a power mode that allows the computer to save an image of the desktop to the hard drive and enter a state of reduced power consumption to save energy.
what button on PSP skips the initial setup
Reboot the computer; while it is rebooting, press the F8 key repeatedly and an option the start in Safe Mode will appear.
When you boot your computer, hit the F-8 key to start the "Safe Mode" While in safe mode the PC will ask if you wish to restore the computer to an earlier setup which was working. Tell it yes, follow the prompts, and away you go.
To change the date and time on the Sharp EL-2630P III, turn on the calculator and press the "MODE" key until you reach the "SETUP" mode. Then, use the arrow keys to navigate to the "DATE/TIME" option and press "ENTER." Input the desired date and time using the numerical keys, and confirm your entries by pressing "ENTER" again to save the changes. Finally, exit the setup mode to return to the calculator's normal operation.
energy saver
To abort setup mode on a Cisco router, the user can press Ctrl + C. This key combination interrupts the setup process and returns the user to the command-line interface (CLI). Alternatively, users can also type exit to exit setup mode.
ctrl c
Use CMOS setup.