If the area is rough to the touch, or has burrs or snags that catch when moving your fingers across the area, then use 400 to 600 grit sand-paper to remove or reduce them. Then, using a palette knife, apply an even swipe of fill compound across the void, with the final goal being to fill the void to a level consistent with the surrounding leather. If the back side of the cut is accessible placing something solid and flat such as a CD case to press firmly against can help secure the edges together more easily. To completely fill the void, multiple swipes may be required. For best results, each swipe must be allowed to cure before applying subsequent fill compound.
You can either let the compound air-cure, which can take 10-30 minutes, depending on conditions and the amount of fill compound applied. Or, a hair-dryer on high can be used, but this tends to skin over the top of the fill compound, trapping moisture in the lower layers, and will represent as residual shrinkage after the repair is done, as the trapped moisture is slowly absorbed by the surrounding leather fibers.
The fastest and most reliable way is to position a lit 60-75 watt light bulb above the repair, at a height of about 3-4 inches. The bulb's radiant heat helps to evaporate the moisture quickly out of the fill compound without skinning over, or forcing it down into the lower layers. A bulb can cure a fairly deep swipe in 3-4 minutes. You can sand between swipes to eliminate burrs, and feather the edges of your swipes.
Dry sanding is preferable if there are no major ridges or burrs to remove. Dry sanding is used to remove grittiness. Wet-sanding is used to knock down high spots and remove ridges quickly. Do not over-saturate when wet-sanding. Lightly dampen the sandpaper with water, and blot, so as not to introduce too much moisture back into the filled area.
Alcohol wipes can be used to remove ridges, and feather the edges of the compound, as well. The solvent softens and reconstitutes the fill compound, helping to eliminate high spots or ridges as you rub across the problem areas.
Typically the next step is to apply the correct color to conceal the repaired area.
There are many suggested ways to fix holes in leather. Some suggestions may include replacing the ripped hole with a match of the same leather fabric.
One good website with directions on repairing cracked leather is http://www.ehow.com/how_2091266_fix-cracked-leather.html. Another great website is http://www.doityourself.com/stry/how-to-repair-cracked-leather.
With use they'll soften up. Mink oil softens and conditions leather very well.
Fill the top row with leather and then fill the right side of the middle row and the left side of the middle row with leather also.
how to fix cracks in patent leather
Spazzalato leather is a type of cowhide leather that is quite shiny. It is made to look similar to patent leather, but is more affordable. While it is usually rain-proof, it can be easily cracked.
3 ways is to tape them, glue them, or have your mom spit on them -------------------------------- This is a good link for how to fix leather that has cracked. I'd recommend doing what the link recommends rather than 'taping, glueing, or having your mom spit on them', lol.
cracked gas line, cracked bulb, or weedeater out of gas
You should make sure they stay supple and in good condition before the leather gets cracked or hard by regularly treating them with a good quality brand of leather conditioner.
One can find information about purchasing Frye Veronica cracked leather boots by looking on the Nordstrom website. You can see all the details about the boots, shipping and returns, and other things you may like by using Nordstrom's page.
You can go to the dentist and have them fill in the crack or file the crack down.
You may have a bad head gasket or possibly a cracked head.
car seats are made of the highest of leather fabrics. that is depending on the car, low class cheap cars are made of a lesser leather fabric while high class exspensive cars are made of top leather fabrics, stick with the higher class cars if you dont want the easily cracked low class leather.