CORRECT table cloth SIZE
for a 90 round table?
90 by 156 will make how many yards of table cloth for a rectangular
We're assuming the table and cloth are round? The cloth is a circle with a diameter of 90 inches - 30 from the floor to the table, 30 more across the table, and 30 more to get back down to the floor. The circumference of a circle is pi times the diameter. Do the math!
Since round table cloths are measured on the diameter, not the circumference, you would fold it in half twice, measure 35 inches (half of 70) from the center of the cloth, add 1 1/2 inches for the hem, and that is where you start your cut. You don't measure up from the bottom because you can't be sure if they added the hem before or after their measurement.
10 chairs!
If the table height is standard 29 inches, if you want the drop up to the ground, you require 132 inch round tablecloth and if you want the drop half the way (i.e 15 inches) then 102 inch round tablecloth is perfect fit.
For a Rectangle table: Measure the width and length of your table, then subtract those numbers from the width and length of the tablecloth and then divide by 2. For a Round table: Measure your table at its widest, then subtract from the tablecloth diameter and then divide by 2. Example: Your table is a 60" round. The tablecloth is a 90" round. 90"-60"=30" 30" divided by 2=15" 15" the drop around the table!
A table which is 90 inch around its outside (circumference) is 28.648 inches (to 3 dp) across (diameter).
No because a round table with a circumference of 60 inches has an area of just over 286 square inches.
The answer depends on the units used for 90 x 132. A 90 foot x 132 feet tablecloth will fir easily whereas a 90 millimetres x 132 millimetres will not even cover one table setting!
Is your unit of measure inches? If not what is it? Is your dimension the diameter or the circumference? The diameter is the distance across the table through the center point and circumference is the distance around the table. Ask the entire question again using the above clarifications.
Table linen size will depend on the drop you need. For a 5 foot diameter (60 inch) ROUND table and using a 90 inch ROUND tablecloth your drop would be 15 inches all around the table. For a 5 foot diameter (60 inch) SQUARE table and using a 85 inch SQUARE tablecloth your drop would be 12 and a half inches all around.
10 x 9=90