P = F/A, so Area = Force/Pressure
You can find Dynamic pressure by using bernoulli's equation. P = (density * velocity^2)/2
Pressure is calculated by dividing the force applied (in Newtons) by the area over which the force is distributed (in square meters). The formula for pressure is: Pressure = Force / Area. Make sure that the unit of force is in Newtons and the unit of area is in square meters for accurate calculations.
we know pressure = force/area we can calculate force from this equation therefore force =mass *acceleration a=9.8 finally we obtain the mass.
The force exerted on an object can be calculated using the formula: Force = Pressure x Area. If the pressure is 99500 pascals and the area of the object M squared is given, you can multiply the pressure by the area to find the force.
The formula to find pressure is given by the equation ( P = \frac{F}{A} ), where ( P ) represents pressure, ( F ) is the weight (or force) applied, and ( A ) is the area over which the force is distributed. Pressure is measured in units such as pascals (Pa) in the SI system. Essentially, pressure increases with greater force or decreases with a larger area.
To find the pressure in a pipe, you can use the formula: Pressure Force/Area. This means that pressure is equal to the force applied to the fluid in the pipe divided by the cross-sectional area of the pipe. By measuring the force and the area, you can calculate the pressure in the pipe.
Mass = Pressure*Area
Pressure=mass/unit area
To determine the pressure of a system, you can use the formula: Pressure Force/Area. This means that pressure is calculated by dividing the force applied to the system by the area over which the force is distributed. By measuring the force and the area, you can calculate the pressure of the system.
To calculate the force exerted on an object in a well flowing at a given rate, you can use the formula: Force = Pressure x Area. First, calculate the pressure at the depth of the object in the well using the fluid's density, gravity, and depth. Then, determine the cross-sectional area of the object to which the pressure is being applied. Multiply these values to find the force exerted on the object.
To find the amount of pressure exerted on an object, you must divide the force applied on the object by the area over which the force is distributed, following the formula Pressure = Force / Area. This calculation gives you the pressure in units such as Pascals (Pa) or pounds per square inch (psi), depending on the units used for force and area.
pressure =force/ area pressure of a liquid is density time height.