The blower resistor is located behind the glove box. You have to remove the glove box (easy; but its best to remove contents of glove box first), then locate the resistor plug located directly behind the glove box light, within the blower channel/housing/black plastic construct..?. or whatever you wanna call it. The wire for the plug should be visible, while the resistor itself resides within the blower housing.
you need a new blower motor resistor with auto temp control
Could be, blown fuse, bad blower motor, bad blower motor speed resistor, bad blower motor switch,
It is behind the glove box, on top of the blower motor box. It mounts with 2 small screws and is easily visible after you remove the glove box outside panel (1screw and a clip) , the Glove box & the glove box mount panel (4 phillips screws & 2 10mm bolts.)
on the front of the motor under the exhaust manifold
Onde está o numero do motor da santa fe 2010
There is a fuse box under the hood 40 A marked as BLR on the lid. In addition there is a 10 A fuse in the passanger box in position 9 that controls the relay that powers the blower through the switches. The relay is mounted on the blower housing. The 40Amp fusible link is in the fusebox under the hood. The 10 amp fuse is inside the car below the steering wheel. The blower motor resistor assembly is located behind the glove box on top of the blower housing. The blower motor relay is mounted to the right of the blower housing, it has a red wire and a red w/ white stripe wire leading into it.
Hyundai Santa Fe was created in 2001.
5w20 or 5w30 - i like full synthetic always
The Hyundai Santa Fe is built in Alabama, by Hyundai Motors. Hyundai is a Korean auto company with factories in the U.S.
hyundai santa fe ac condensor
The 2006 Hyundai Santa-FE has 24 valves.
The 2002 Hyundai Santa-FE has 16 valves.