To fit a starter motor on a Fiat Brava 1.2 16v, first ensure the vehicle is safely lifted and secured. Disconnect the battery and locate the starter motor at the transmission housing. Remove the bolts securing the old starter motor, disconnect the wiring, and then install the new starter by reversing the process—connecting the wiring first and securing it with bolts. Finally, reconnect the battery and test the starter to ensure proper operation.
fiat brava 1.6 16v 2001
The starter motor on a 2003 Fiat Stilo 1.6 16v is located on the front side of the engine, near the transmission. It is typically mounted on the lower part of the engine block, making it accessible from underneath the vehicle. To reach it, you may need to remove the protective cover or other components that obstruct access. Always ensure the battery is disconnected before attempting any work on the starter motor.
The diagnostic socket for the Fiat Brava 100 16V is typically located under the dashboard, near the driver's side. You can find it to the left of the steering column, often above the pedals. It may be covered by a plastic panel that can be removed for access. This socket allows for connecting diagnostic tools to read fault codes and perform vehicle diagnostics.
Where are the timing marks on fiat 1.2 16v
there are five stages stage 1 - 20nm st 2-40nm st 3 tighten further 90 degres st 4 further 90 degres st 5 angle tighten further 90 degres that's what it says in my haynes manual fiat brava n-w reg 4-cylinder petrol engine
there is no timing marks
under the drivers seat
No,car have multipoint injection.
usuall engines are as follows, there are more; 1.1 1.2 8v 1.2 16v 1.4 16v 1.4 turbo 1.8 hgt 1.9 multijet
Nowhere
Yes,they are the same,i have done this.
depends on what motor 80 to 120. 8v 16v? tell year, and what motor 8v and 16v and will tell flywheel brake horse power.