u split the tractor in half by the bell houseing then scim up the flywheel!!
Did you find the answer to this question? I am having the same problem.
the clutch went out on my 97 Chevy cavalier how do i fix it
clutch basket on 89 Harley
I would recommend taking it to a car/tractor shop.
I would start by checking to see if your operator presence switch is still working properly. Located under the seat, this switch is designed to shut the tractor down if the operator were to fall off the tractor suddenly. The clutch on your tractor would bypass that switch until the clutch was let out.
The 185 had a live PTO in that the tractor's movement could be stopped with the PTO remaining engaged through the powerdirector clutch (this was the tractor's 2 speed, shift on the go, set up). However, if you pushed the foot clutch in, the PTO would lose power along with the forward motion of the tractor stopping. Also, the 185 was available with a hydraulically engaged PTO clutch, which would allow the PTO to be engaged while the tractor is moving, where the mechanically engaged PTO required the foot clutch be depressed, the tractor be brought to a stop, then the PTO engaged and the foot clutch reengaged. It was "live" per definition, but not "independent."
Warm the tractor up at high idle for at least 15 minutes. Lower idle, and force it into gear in a safe area. Drive around at high rpm depressing the left and right brakes hard----and until the clutch breaks free. Or chain the tractor to a tree, by the draw bar only, and drive away. Avoid the problem by keeping the clutch depressed when the tractor is not in use. Jam a piece of wood between the clutch and whatever is nearby.
try, bleeding the clutch. heres the link for how to bleed the clutch I wrote. This process is the same I did it on my 97 GSX. http://wiki.answers.com/Q/How_do_you_bleed_a_clutch_on_a_1998_mitsubishi_galant_turbo_diesel&updated=1&waNoAnsSet=1
what are the torque specs for clutch and fly wheel model 5700
to fix a sears tractor
How you should fix a tractor fork depends on the type you are using. You should look at your instruction manual or call your local farm supply store for instructions. You can also search online for your tractor fork to find instructions for how to fix it for various issues.
I have the clutches in my kx 85 but the clutch rode that goes to the clutch cable keeps Hitting the clutch Case How do I fix it