What type of pull on what type of door? Wooden, you can use tooth picks or slivers of wood to fill the hole in the handle so the screw will grip. Metal ones that have pulled through can have a fender washer put on the back side. Plastic can sometimes be glued. For a better idea, a little more information is needed.
Depends on what is wrong with the handle. You will more than likely have to remove the door panel in order to find out what is wrong.
You can easily fix a lose Kwikset door handle by taking the appropriate screwdriver and tightening the screws that attach the door handle to the door frame.
Just replace it with another door handle. This is easier since you don't have to take the time to fix it.
pull the door handle on the outside and open the latch by hand both at the same time
Pull the inner door panel off and look inside the door and you will probably find a rod off the outside door handle.
Pull the Handle down and then pull the door outwards
you will have to take the door panel off from the inside then there should a flim or plastic held on with putty, just pull easy and it will come off and your linkange and handle are right there
pull on the handle.
grab the handle and pull
To fix the door handle of a VT Commodore, remove the hardware from the door and loosen the knob. Remove the turn post and tighten all mechanical parts.
if rear side door; unlock and pull handle. if boot lid; pull handle in drivers side door-well (side of the drivers seat) "door open"
how much does it cost to fix a door handle to a 2007 chevy colbalt Ls the inside cables inside handle and out side door handle