What type of pull on what type of door? Wooden, you can use tooth picks or slivers of wood to fill the hole in the handle so the screw will grip. Metal ones that have pulled through can have a fender washer put on the back side. Plastic can sometimes be glued. For a better idea, a little more information is needed.
To operate a pull-down door handle, simply grasp the handle with your hand and pull it downwards to open the door. Release the handle to close the door.
Depends on what is wrong with the handle. You will more than likely have to remove the door panel in order to find out what is wrong.
You can easily fix a lose Kwikset door handle by taking the appropriate screwdriver and tightening the screws that attach the door handle to the door frame.
Just replace it with another door handle. This is easier since you don't have to take the time to fix it.
pull the door handle on the outside and open the latch by hand both at the same time
Pull the inner door panel off and look inside the door and you will probably find a rod off the outside door handle.
Pull the Handle down and then pull the door outwards
grab the handle and pull
pull on the handle.
you will have to take the door panel off from the inside then there should a flim or plastic held on with putty, just pull easy and it will come off and your linkange and handle are right there
To fix a loose door handle, you can tighten the screws on the handle using a screwdriver. If the screws are stripped, you may need to replace them with longer or thicker screws.
To remove a Kwikset door handle, you typically need to locate and unscrew the screws on the plate covering the handle, then pull the handle off the door.