Use the CD following the printer or download the driver from HP's site.
The driver is a "backround program" needed for most devices to run on Windows.
If you allready installed this try removing the printer and reinstall.
If it still does not work read up on "Print Spooler Service".
You will need to find a driver. Try the HP web site.
HP photosmart printer can be identified by plugging the USB to the computer. Do make sure that the printer has the right driver and computer is up to date for plug and play options. Try check if the driver is working properly before returning the printer and say that it is not working.
Install Windows XP mode on Windows 7. Connect your printer. At the taskbar at the top of the XP mode window, click on the USB tab. Select the Kyocera Fs-720 printer. If it asks you if you want to share, click yes. Your printer is now detected by the virtual xp machine. Download the XP Kyocera Fs-720 driver. Install it. Open the document you want to print in the XP mode and print. You cannot print from Windows 7. You have to do so via the xp mode. To print in the future, you will have to always click on the USB tab and share the printer. (This disconnects it from Windows 7 and connects it to the virtual XP mode machine).
One can find more information on how to install drivers for the Zebra Label Printer on Windows XP from the official Windows website or the official Zebra Technologies website.
You may need to verify the printer driver is correct. If you connected the Printer before installing the driver, you may need to go into Device Manager and "uninstall" the generic printer/device that Windows installed for you. At that point, you can disconnect and reconnect the USB cable and windows should recognize the printer correctly... as long as you installed the correct driver. Similarly, you could try using a different USB port for your printer.
There is no specific printer that you "need" for Windows 98. Any printer with a Windows 98 driver should work.
yes, install the proper printer driver.. it works both 2000 professional and server..
You must install the drivers for it, and make sure that the driver for the USB hub is also installed.
first uninstall the printer driver from control panel and then again try to install the driver.. you can also use system restore utility if it not works..
The printer driver is probably corrupt. Try reinstalling the printer driver from the maker's website or install disk.
DOS only supports the generic based printers.. You need not to install any printer in it as it always use Generic Text printer driver.. You can only use Dot Matrix Printer (DMP) in DOS without any driver..
install to personal computer