Hey Joshua===Remove the front wheels then take out the two pins that hold the calipers which requires a 3/8 Allen wrench. Then pry the piston in some to be able to remove if off of the rotor. remove the caliper from the rotor and hang it with a coat hanger so it doesn't hang by the hose. Take the pads out and with a "C" clamp push the piston completely in the caliper. Install the new pads using the grease or shims included with them. and simply put it back together. Don't forget to pump up the brakes when you get ready to move it as you will have NO brakes until you do. GoodluckJoe
On my 2000 I had bolts, 12mm and 13mm. Once they are removed the whole assy came out. Watch which pad is in which way, the pad with the sqweeler tab goes to the inside. Clean everything and let dry before installing new parts. I put in top of the line parts for about $170.
Yes
take the wheels off, unbolt the brake calipers and the pull them off and now you can just pull the rotors off.
i have a 2004 Chevy Malibu classic which i think is the same as a 2003. the sizes r 4-6 on the front doors and 6-9 on the back.
How mcuch does a 2003 Chevy Malibu weigh?
the fuel pump is in fuel tank!!
How program my keyless entry remotes for 2003 chevy malibu
right front below headlight housing,,,drivers side!!
how do you check the safety neutral switch on a 2003 Chevy Malibu
How do you change the fuel pump on a 2003 Chevy Malibu?
the switch is located on a bracket at the top of the brake pedal (its the switch with 2 connectors) the other 1 is for cruise control system.
The 2003 Chevrolet Malibu has 39.4 in. of front head room.
The 2003 Chevrolet Malibu has 52 in. of front hip room.