0
How do you fix the garage door is going down and going up again?
Wiki User
∙ 12y ago
Well, make sure nothing is in the garage door's way.. :) hope this helps!
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Why does the garage door go down but not up?
Likely a broken spring
Are over head garage doors safer then other garage doors?
No, because they could easily come down at any time. Although, everything has it's up's and down's. I think that any garage door type you get is going to have it's safety precautions, and I'd just stick to what you prefer and what works best for you.
How does a person fix a broken garage door remote?
Many individual never thought of the work our garage door does - lifting and closing a large door every day, over and over again.. The fact is, your garage door opener really doesn't do much work, because of a physics helper, the spring! Springs are utilized as the door is lowered, and the springs are stretched out (the motor literally pushes the garage door down). When it is time to lift the door, the springs do 95% of the work as they recoil and pull the door back up, leaving the garage door motor to do little more than wind up the loose cable or chain. This is why most garage door openers are rated at only 1/2 to 1 horse power - it doesn't take much power to lift up a garage door that is being pulled up by stretched springs.
Why can you pull a garage door down easy after raising it?
Gravity and the weight of the door assist in making it easier to pull down than to pull up.
How To Save Money On Garage Door Repair?
A broken garage door can be a major inconvenience. If your garage door breaks in the winter, you might have to park your car out in the driveway. This means that you are going to need to scrap your windows in the morning. This is never a pleasant task on a cold day. The sooner you get your garage door repaired, the sooner you can start parking your car back in its normal spot. If you do not want to spend a lot of money on garage door repair, there are ways you can save money. Here are some tips to help you keep the cost down. Check The Battery In Your Opener Before you call a repairman, check the batteries in your garage door opener. They might need to be replaced. Make sure you check this common problem before you pay for a service call. Plus, if you replace the batteries and you get your garage door to open, you can tell everyone that you fixed your garage door yourself. See If Your Garage Door Is Still Under Warranty If you have recently purchased a garage door and it has already stopped working, check to see if it is still under a manufacturer’s warranty. Some manufactures will pay to repair a garage door if it is less than a year old and has been used properly. Avoid Emergency Calls When you call the repair service provider, make sure you specify that you do not need an emergency call. If you can live with your broken garage door for a couple of days until a regular appointment is available, you can save a significant amount of money on your garage door repair. Consider Purchasing A New Garage Door If your garage door is older, it might be better to just replace it. If you are going to have to keep repairing your old unit, look into buying a new one. Some companies offer free or cheap installation when you buy a garage door. Get a quote for garage door repair, and get a quote for a total replacement. That way, you will be able to see which option makes better financial sense.
How do you remove code on garage door selling car?
You remove the code from the vehicle by holding down (up technically) on the first and third buttons, simultaneously. Watch for the light to change from solid to flashing after 1 min. However, in removing the code from the garage door opener mounted in the ceiling of the garage, you will need the original "clicker". With clicker in hand, you hold down on the setting button on the garage door receiver while also holding down on the "clicker" button. The garage door receiver light should flash several times to acknowledge the code. Test by using the clicker to open and close the garage door. Yours- Sarah Lee aka Mycarlady
Where can one buy an inexpensive garage door opener?
You can find garage door openers at relatively inexpensive prices from a lot of retailers. However, I sourced a low cost garage door opener (priced at $39.99) from Walmart that operates with a four digit pin number which should prevent the door accidentally dropping down. It is the 'Chamberlain Clicker Universal Wireless Keypad Garage Door Opener'.
Why is your lift-master garage door opener beeping?
It is probably not going down? Check the sensors at the bottom of the track. Make sure there is not something in front of one and that the lights are on. They may be misaligned.
How do you set the homelink garage opener in 2007 Toyota sequoia?
First, park you Sequoia in front of the garage door you want to sync. You need to hold down the button for garage door opener on the overhead pannel until the corresponding indicator light starts blinking. Then walk over to the garage door motor and push the button on the back of the motor (it's usually red). That will send a signal to your Sequoia, that will be stored by by the garage door button. That should do it!
Garage Door Repair for Basic Problems?
It is not uncommon for people’s garage doors to start acting up. While the average person can’t fix everything that can go wrong with a garage door, basic garage door repair is not that difficult. There are a number of ways that your garage door can malfunction. Here are some common problems, and how to fix them.One of the most common issues is when the garage door starts going up and down on its own, almost as if somebody were continually pressing the open and close button. As a matter of fact, there is a good chance that something very similar to that is the problem. Most likely, somebody else in the neighborhood has a garage door opener that operates on the same frequency. In some cases, they can end up interfering with one another. If this is a problem you are experiencing, the solution is so simple you can barely call it garage door repair. Simply change the code on your garage door. The way in which this is accomplished will vary from garage to garage. In most cases, you will do something to the effect of holding the transmitter near the box while holding down a specific button for an extended period of time. Most garage door openers are set up to automatically set up a new code when you do this.Another common problem is that your garage door goes halfway down and then comes back up when you attempt to close it. If this is happening, it is probably because you have a safety system installed that prevents the door from closing if their is something blocking it. If there is nothing obstructing the door, it is most likely a problem with the sensors. This problem can usually be fixed by cleaning the lenses on the sensors.Finally, the door simply might not open when you use the garage door opener. If this happens, try replacing the battery. Oftentimes this is the only issue. If this does not fix the problem, you might need to buy a new transceiver.If any of the previous methods of garage door repair do not work, you will most likely need to get in touch with the manufacturer to troubleshoot the problem.
How do you saved game in gta underground 2 in game?
Easy just go down to the garage then put the car in, go to the door next door to the garage and it asks to save then say yes if you want to or no if you dont.
How do you set garage door opener on a 2007 jeep liberty?
It should be in the manual. I have an acura and this is what I had to do. Have your car in the garage, unplug the garage door opener. Hold the button in your car until it blinks fast that resets everything. Once is does hold down the button you want use to open the garage. Plug the garage door opener back in and the bottom should work. It took a few seconds after I plugged it in to work. Hope it works for you...
