You go to Rona or Home Depot and buty a new end or coupling. For ends, just trim off the last inch and fit new end,tighten clamp. For coulpling cut 1/2 inch either side of hole or crack, make sure you have 2 good ends, fit a clamp over each, then force coupling into both pipes,tighten clamps.
A defective brake hose must be replaced. There is no way to fix it.
You don't normally fix the power steering hose. Buy a new hose at an auto parts store.
get a new hose
The easiest way to fix a 1988 Ford Bronco gas hose leak is to replace the hose. You can also patch the week in the hose.
If the bypass hose on the 2000 Cavalier is rubber then the hose can be cut and spliced together with a coupling to fix the leak. If the hose it metal then it will need to be replaced.
To fix a loose vacuum hose on a 2002 GMC Envoy, it can be clamped with a small hose clamp. Use a metal clamp that can be adjusted to fit the small hose.
To fix a leaking water hose end, you can try tightening the connection, replacing the washer, or using a hose repair kit. If these solutions don't work, you may need to replace the hose end or the entire hose.
To fix a leaking hose end, you can try tightening the connection, replacing the washer, or using a hose repair kit. If these methods don't work, you may need to replace the hose end altogether.
Your washer drain hose may be leaking due to a loose connection, a clog, or damage to the hose itself. To fix it, check the connections for tightness, clear any clogs, and replace the hose if it is damaged.
Your washing machine drain hose may be leaking due to a loose connection, a clog in the hose, or damage to the hose itself. To fix it, check the connections and tighten them if needed. Clear any clogs in the hose and replace it if it is damaged.
Replace the hose or use a splice kit for a temporary repair.
Nine times out of ten, the best fix for hose problems is to replace them, assuming the clamps were tight to begin with.