you must first put on your yamaha hose adapter for your garden hose. then without turning the water on plug the hose into the yamaha. there should be a place to put the hose in the engine compartment. then start your engine the turn the water on. make sure the water never on when the engine is off. let the pwc run at idle speed for 240 seconds (4 mins). then turn the water off and shut down your engine. gracias
should be on a tag on the flywheel end of motor
A motor flush is designed to help clean any sludge from the engine. A cleaner system will make fluids flow easier, and make the engine last longer.
.01$
part number for 2010 fxho waverunner oil filter
Yes, but on a waverunner it's hard to stay at one speed making riding hard for the wakeboarder.
to flush the fx140 you lift up back of seat and you will see a small black hose with a plug in it . you pull this plug then put your Yamaha hose adapter onto the end of your hose and connect it to the black hose .turn on the water then start engine let run 2 minutes and your done
like any 2 stroke chainsaws weed eaters merc outboards motor mowers ,motor bikes check fuel prime don;t flood first pop choke in.
waverunner iii 650 goes about 38-40 mph. at least that's what my speedo says.
Trim is for going faster. It causes all the weight of the waverunner to go forward. If you experiment with it you will notice the difference. Hope this helps.
Add Engine Flush to the motor oil at running temperature before changing the oil. After adding the product, allow the engine to idle for approx. 10 minutes. Then change the oil and the filter. Engine Flush is compatible with all commercially available motor oils. We recommend cleaning the engine interior with Engine Flush before every oil change.
ON 2007 KAWASAKI WAVERUNNER WHERE IS THE BATTERY LOCATED? I TOOK THE SEATS OFF AND CAN'T FIND IT AND I DON'T HAVE AN OWNERS MANUAL.
The engine size is Yamaha WR500 in a 1993 waverunner, the engine size is right in the name of the jet ski.