You would have to run new wires to obtain 240 volts or use a step-up transformer.
Any where from 110 volts to 130 volts alternating current is available from a 110 VAC outlet.
If you are no longer using the dryer and there are 4-wires, and the dryer was 220 to 240 volts, it can be split into two 110 to 120 Volt circuits.
Different plugs are designed so that you can't plug an appliance into the wrong voltage. A dryer is usually 220-240 Volts and your standard outlet is 110-120 Volts. You can't do what you suggest.
Never heard of a power tool that runs on 100 volts AC. It would have to be 108 to 120 volts or 220 to 240 volts. It will work on the 120 volt outlet if is it 60 hertz in the U.S. or 50 Hrtz in some other countries. If it is 50 Hrtz then do not use it in the U.S. without a converter.
Household appliances usually have a voltage of either 110 or 220 volts; there should be a sticker somewhere that tells you the voltage for specific appliances. Make sure you don't plug it into the wrong voltage. Especially plugging an equipment designed for 110V into an outlet that gives 220V will burn your equipment.
Any where from 110 volts to 130 volts alternating current is available from a 110 VAC outlet.
Not unless you have a 110 volt supply to plug it in to. The standard General Power Outlet in Australia is 240 volts AC at 50 Hertz.
Not unless you have a 110 volt supply to plug it in to. The standard General Power Outlet in Australia is 240 volts AC at 50 Hertz.
Yes - a hair-dryer rated at 120 volts will work in a 110 volt outlet.
It is dangerous to connect 110 v equipment to a 240 v system. See an electrician before you do anything.
Usually 110 volts
The watches themselves use batteries and do not depend on the house voltage supply. It is important to have the correct charger suitable for the house voltage of 110 or 240 volts.
If you are no longer using the dryer and there are 4-wires, and the dryer was 220 to 240 volts, it can be split into two 110 to 120 Volt circuits.
No, unless the motor was wound for dual voltage operation, which it will state on the motor nameplate, a 110 volt motor run on 240 volts will be damaged.
Usually 110 volts
America 120 volts 60 Hertz, Australia 240 volts 50 Hertz.
Different plugs are designed so that you can't plug an appliance into the wrong voltage. A dryer is usually 220-240 Volts and your standard outlet is 110-120 Volts. You can't do what you suggest.