0
The most convenient way of changing AC voltages is with a transformer. Depending on what the load amperage needed will govern the sizing of the transformer. These types of Transformers just plug into the wall receptacle for the primary 120 voltage side. For the secondary side you just need to find an adapter that outputs 3 to 5 volts AC. Read the nameplate on the adapter because a lot of them have a rectifier in them that changes the AC output voltage to DC output. Do not use the DC output adapter on an AC required load.
What else can I help you with?
What is the ratio of a 480vac single phase and a 120 vac secondary voltage?
The ratio for a 480 VAC to 120 VAC is 4 to 1.
What is the maximum voltage rating for a 120/240 VAC breaker?
The maximum voltage rating for a 120/240 VAC breaker is 240 volts.
What is the ac voltage reading between the bare copper wire and the hot black wire 120 vac or zero volt?
Should be about 120 VAC.
What is 35percent of120?
35% of 120= 35% * 120= 0.35 * 120= 42
How do you build a 120 vac - 24 vdc power supply?
i dont no
A commonly-used device for stepping down 120 vac is?
Converter
How 240 VAC achieved in a 120 VAC environment North America home?
By connecting two separate 120 VAC legs into one. If they are and if it comes to your home from a local utility they will be, it will add to 240. Whenever combining AC or Sine waves into one for the purpose of adding they must be in phase.
What would the input current be for a 275 kva transformer with 2 phase of a 480 vac in and 120 vac at 20 amp output?
qsq
What is the recommended voltage input for a 24 VAC transformer?
The recommended voltage input for a 24 VAC transformer is typically around 120 volts.
What is 35 percent of 12000?
35 percent of 120.00 = 4235% of 120= 35% * 120= 0.35 * 120= 42
Is there anyway to get 120V 60Hz from a 220V 50Hz power supply?
You can purchase an inverter that accepts 220 VAC 50Hz input and produces 120 VAC 60Hz output. You can purchase an inverter that works from single phase or three phase electricity and can produce single phase or three phase output. You must specify the 120 VAC current load when choosing the inverter. You must also be sure the 220 VAC 50 Hz supply has sufficient current capacity to operate the inverter with the required 120 VAC current load. The inverter works by rectifying the 220 VAC 50 Hz input into DC energy. The inverter then uses switching solid state components to produce 120 VAC 60 Hz output from the DC energy.
50 hz 60 hz 120 vac will work on 220 vac?
No, a device designed to work on 50 Hz/60 Hz at 120 VAC will not work on 220 VAC without a voltage converter or transformer. The difference in voltage can damage the device and may not function properly. Always ensure that the device is compatible with the voltage and frequency of the power supply before connecting it.
