0
It's hidden behind the rear number plate, held in place with a magnetic clip. You'll need to remove the number plate and then apply a strong magnetic field to release the keyholder. Any decent hardware store will be able to provide a suitable electromagnet once you explain what it's needed for.
What else can I help you with?
How do you unlock the doors of a 97 GMC truck without a key?
Try using a key from another Chevy or GMC pickup. It has worked twice for me with family members and the key I used wasn't the same year or model. Just don't force it if it doesn't work easily.
Where is the ignition switch located on a 1984 Dodge pickup truck?
The ignition switch on a 1984 Dodge pickup truck is typically located on the steering column. To access it, you may need to remove the lower steering column cover. The switch is usually mounted near the ignition lock cylinder, where the key is inserted. Always refer to a service manual for specific details related to your model.
How do you start the pickup truck in bus and cable car simulator?
By pressing the "E" key.
Would a 1998 Chevy 2500 pickup truck have a chip in the key?
Never seen one.
Is a 1995 Chevy S-10 pickup truck supposed to have a ignition key with a chip in it?
That kind of key was not used in 1995 models.
How do you remove a ignition key tumbler in a 1977 Chevy pickup?
Remove the retaining ring from the top of your 1977 Chevrolet pickup truck ignition key tumbler. Slide the ignition key tumbler out. Remove the wiring harness from the end of the key tumbler.
Were do you get a key code for 1999 f150 pickup?
if i have replace my steeringcolumn with one out of another ford truck and do not have a key for eithe how do i bypass antitheft and start vehicle
How do you change the key cylinder in a 1995 GMC Jimmy?
Type your answer here... uninstall 1995 Chevy g m c truck key cylinder
How do I fix a 1979 GMC truck I turn the key wait about 15 seconds and the truck starts it does not start when you first turn the key what do I need to replace sometime it starts instantly?
try a fuel filter change first
How doi remove ignition without key from 1986 Toyota pickup truck?
Begin by removing the retaining ring at the top of your 1986 Toyota pickup truck ignition switch. The ignition switch will slide out. Remove the wiring harness from the back of the ignition switch.
Where is the radiator drain petcock on a 1998 gmc pickup with a 5.7 engine located?
Its on the bottom drivers side of the radiator. Just inside the bottom of the wheel well lip is your easiest access. It should be a plastic "key" type on that truck. May be a plug at the bottom or rear bottom of radiator
How do you slim Jim a 2005 gmc sierra pickup using a coat hanger Is it possible?
The old "slim jim" trick doesn't work well anymore. They redesigned the inside of the door to make harder to jimmy the lock. Keep a spare key in your wallet or stashed under the truck somewhere only you know about.
