No, printers are usually not worth it to fix. I would recommend recycling it.
No, fuse box fuses are of the screw in type. Plug in fuses are of a cartridge style that plug into the fuse holder which supports the fuse on either end of the cartridge.
That is impossible as it will alwyas stick out although you can use the GBA cartride holder to stop it
Boulder.2 syllables:bolder, boulder, colder, dolder, folder, golder, holder, molder, moulder, nolder, older, polder, smolder3 syllables:beholder, file folder, gas holder, roach holder, shore boulder4 syllables:candle holder, cartridge holder, glacial boulder, river boulder5 syllables:cigarette holderfrom: rhymezone.com
If its a cartridge style replacement filter(as opposed to a spin on), then simply unscrew the hex-head shaped holder with a crescent wrench...:)
Protect your desk, printer stand or work surface by placing an old newspaper in front of or next to the printer. The newspaper will provide you with a place to work without getting ink anywhere you don't want it. It seems as though no matter how careful or neat you are, a little bit of ink always manages to escape when replacing an ink cartridge. Prepare the new ink cartridge for installation. Remove the replacement cartridge for your Canon printer from all of its packaging. You may need scissors to remove the heavy wrapper. Leave the protective orange cap or tape in place for now. Set the new cartridge aside on the newspaper. Remove the old ink cartridge from the Canon printer. With the printer on, open the front door or panel of the printer. Wait a second or two and the ink cartridge holder should move to the opening where it is accessible. If it does not move, shut the door, turn the printer off for a moment, turn it back on and try again. Lift the small lever that secures the ink cartridges within their holder. On most Canon printers, it is colored green and located on the right side of the ink cartridge holder. Gently lift the old ink cartridge out of the printer. Place the new ink cartridge in the printer. Remove the plastic cap or tape protecting the ink cartridge, being careful not to touch the black and gold "sensor" area of the cartridge. Gently but firmly push the new cartridge into the empty slot left where you removed the old ink cartridge. The label should be facing outward. You should feel the cartridge pop into place. Then push the lever back down that you lifted in Step 3. Close the printer door. Use paper towel or wet wipes to clean any ink from your hands.
The Lexmark 1200 takes a black cartridge and a color cartridge. The black cartridge that the Lexmark 1200 uses is or 16 and 17 cartridge, with the 17 cartridge being the moderate use cartridge. The color cartridge required by the printer is the 26 or 27 cartridge, with the 27 cartridge being a moderate use cartridge as well.
It is the container for the propellant (gun powder) and a holder for the primer and the bullet. On firing, the case expands, gripping the walls of the chamber, and forms a gas tight seal.
Bus size usually relates to a computer's data bus. Magazine usually relates to a printed booklet or a gun cartridge holder. The two terms are not related. Please restate the question.
cartridge
A cartridge is NOT a mineral.
no