I think you are trying to time the ignition to top dead center. If that is the case the crank position sensor tells the computer when to fire the spark plugs. This sensor gets pulsed by the gear on the crankshaft and depending on where this gear is at in its rotation the crank position sensor lets the computer know where the pistons are at in the cylinder. So the whole thing is computer controlled and a timing light is not used. Of course I'm assuming your car is an OBDII model.
How do you replace the ignition swith opn a 1992 Pontiac Bonneville se
I have to jump start my Pontiac Bonneville 1988 everyday I drive it why is that.
Begin by removing the retaining ring at the top of your 1990 Pontiac Bonneville ignition switch. The ignition switch will slide out. Remove the wiring harness from the end of the ignition switch. Reverse the process to install your new ignition switch.
i don't think there is one
somewhere on the engine
you dont! it has to be in the off position
The lighter module on a Pontiac Bonneville can be removed by unscrewing the mounting hardware. The lighter will then be able to be pulled off the center console.
Assuming this has the 3.8 V-6 engine, the three coils are plugged into the ignition module.
try www.autozone.com and check for vehicle specs.
Pontiac Bonneville was created in 1957.
do know where the horns on Pontiac Bonneville 2000 is do know where the horns on Pontiac Bonneville 2000 is
bolt pattern for 1979 Pontiac Bonneville