After the bolt carrier is removed, the pin is driven straight down to remove.
The Remington model 700 bolt handle is part of the bolt body and this is a one piece forging.The only way to remove the bolt handle is to cut it off at the bolt body.
742 30.06 bolt slipped forward while cleaning.=, took patch with it. bolt loked in place about 3/4 way forward. How do i unlock the bolt?
The Remington model 700 bolt handle is part of the bolt body and this is a one piece forging.The only way to remove the bolt handle is to cut it off at the bolt body.
depending on condition of the wood and the finish on the steel, as well as the rifling in the barrel and the action of the bolt... your price could range between $250-$450
It's probably best to ask a expert.
There have never been any recalls on the Remington Model 742 that I'm aware of. The Remington 742 is now an obsolete model and was replaced with the Remington Model 7400. The bolt received an upgraded design along with the magazine catch/release. At one time Remington was offering a Model 7400 as a replacement for the Model 742, if you sent them your Model 742 along with $350.00. Is there a problem with the 742 that you have?
Once you have the forearm removed you need a special spanner wrench to remove the tube/nut below the barrel. The bolt handle pin is then drifted out of the bolt and then the bolt handle can be removed from the bolt body. The barrel will now come out the front end of the receiver.
Removing the bolt handle is a bit involved. If you slide the ejection port dust cover back and forth slightly until the cut-out on the top of the dust cover is over the bolt handle top you will see the end of a pin. This pin holds the bolt handle in place in the bolt. Unless you have the ability to completely take-down this rifle and then re-assemble it to working order, and have the tools to do so, it is NOT recommended you remove the bolt handle retaining pin.
Please tell me how to install the bolt in a Remington Model 512
To remove: Open action, press trigger rearward and pull bolt entirely from receiver. To install: Insert bolt in receiver, push bolt over plunger in bottom of receiver, pull trigger and complete forward travel of bolt; then rotate bolt handle downward to lock.
What is the value of a Remington 700 bolt action 270ml rifle?
how do you get the bolt back in a remengton 592