Remove top cover,pour in new fluid! toro2
The fluid for the clutch comes from the brake fluid. After the brake master cylinder, there is a clutch master cylinder which takes fluid from the brakes. Fill up the Brake master cylinder.
Look to see where you fill the brake fluid and where your filling the brake fluid that is the master cylinder.
The clutch gets its fluid from the master brake cylinder reservoir. The master clutch cylinder sits just below the master brake cylinder reservoir and is fed fluid by gravity.
There is no fluid in the clutch....The clutch master cylinder takes DOT 3 brake fluid. It is the same fluid that you put into the brake master cylinder
In the master cylinder
Generally brake fluid.
Most vehicles have master cylinder reservoirs that you can see the fluid through. The side of the reservoir has a high and low fluid mark on it.
Good time to replace all the brake fluid. Remove the brake lines from the Master Cylinder and pump the master cylinder dry. Add fresh brake fluid from an unopened can and bleed the master cylinder. Reinstall the brake lines and then bleed all brake lines until you see clean fluid. Keep adding fluid to the Master Cylinder until you are done.Good time to replace all the brake fluid. Remove the brake lines from the Master Cylinder and pump the master cylinder dry. Add fresh brake fluid from an unopened can and bleed the master cylinder. Reinstall the brake lines and then bleed all brake lines until you see clean fluid. Keep adding fluid to the Master Cylinder until you are done.
master cylinder
DOT Brake Fluid.
You put brake fluid for the clutch master cylinder
If non brake fluid is added to the master cylinder, possibly.If non brake fluid is added to the master cylinder, possibly.