You can get a high gloss floor finish for asphalt tile floors by going to a good home improvement and DIY store such as Lowes. An example of such a product that is available from Lowes is the Zep Commercial 5-Gallon Wet Look Floor Polish.
The best way to get shiny hardwood floors is to sand and refinish them and use a glossy (or semi gloss finish). Not only will your floors look glossy, but they will stay glossy looking even after you clean them. (If you floors are in good condition and don't have any scratches, an alternative is to screen & recoat where you just add another coat of polyurethane and you choose a glossy (or semi gloss finish). Please note that some of the products out there that you can rub on and claim to give you a glossy finish will only give your floors a temporary sheen and that they use waxes and oils that will actually damage the finish/polyurethane on the floor and cause to refinish your floors sooner.
A Smooth Hardwood Floor with a high gloss with be the most slippery. The finish on the wood leaves a coat of protection, but also makes it slippery. There are different types of hardwood and finishes though, some are made to be nonslip, some are made to be reflective and high gloss. See: Related Links
there's nothing that you can put on them to make them less shiny your option here would be to sand them and put a low gloss finish on.
If your hardwood floor is not shining, it might need some polish. Or, it might just be old. I suggest investing in a new hardwood floor if yours is so ancient that it has lost its ability to be lucent. Or you can have your floors refinished. If they have been sanded recently, you might have a satin sheen in the polyurethane that was applied. If this is the case, all you have to do is re coat it with a semi gloss or gloss polyurethane.
Satin is lower gloss than semi-gloss paint. Paint finishes in order of decreasing gloss are: * Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint. The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.
Satin is lower gloss than semi-gloss paint. Paint finishes in order of decreasing gloss are: * Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint. The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.
Satin is lower gloss than semi-gloss paint. Paint finishes in order of decreasing gloss are: * Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint. The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.
Satin is lower gloss than semi-gloss paint. Paint finishes in order of decreasing gloss are: * Gloss * Semi-gloss * Satin/Low sheen * Flat Some manufacturers call Satin/Low sheen finish Eggshell, and others regard this as a finish between Satin/Low sheen and Flat paint. The higher the gloss finish the easier it is to clean, the higher its durabillity and the more it shows surface imperfections.
Wood gloss
The easiest hardwood floor to keep clean is one with a lighter color and a low gloss finish. It is better in the long run to invest in a quality finish to avoid the need for expensive refinishing in the future.
Try rubbing the stain off with mineral spirits or paint thinner first. If that doesn't work, you may have to try a chemical stripper that removes the type of finish you applied to your wood floors. Generally, they won't damage the glazing on ceramic tiles, but they may strip color from your grout so be careful.
Satin finish will look very nice, but won't be as shiny as the semi-gloss. I would recommend the satin finish because it won't show scratches as much.