Normally a monitor has controls (buttons) at the bottom that let you adjust the screen. You can make it wider and taller and move it left and right and make other adjustments. By making it taller then wider you can make it fill the screen.
I don't know how this is done on a laptop
I have replaced my drivers rear slider window on two occations. you need to first find a window from a wrecking yard and then there are screws and bolts around the frame. Take these out and then gently pry around the frame where you will find some black soft tar-like stuff that weatherproofs the window. Keep prying gently. Be careful or you will break the new window. eventually the window will come away from the frame. You will need to purchase the black weatherstriping gook that comes as a roll. Clean the new window if it is used of all the old sealant with a razor blade or chisel gently. and put a caulking bead around the frame before installing it in the new frame. That is the best I can tell you.
the frame-type is the brand of frame on your computer...like the black(or white,ect)edge....you know what in talking about?
The available options for the window frame color include white, black, brown, gray, and custom colors based on the manufacturer's offerings.
WindowsTM is an OS and a window is a plate of glass. On your computer, any application and any dialog box that you have running will be running in a "window" Often the window will have a frame (but it does not have to).
The key steps involved in window frame installation include measuring and preparing the opening, placing the window frame in position, securing it with screws or nails, insulating around the frame, and finishing with trim or caulk for a tight seal.
The window fell out of the frame because the frame was not properly secured or the window was not properly installed.
use mini microscopic
To install a window frame properly, first measure the opening and ensure it is the correct size for the frame. Next, apply a bead of caulk around the perimeter of the opening. Place the frame in the opening and secure it with screws or nails. Check for level and plumb, then insulate around the frame and finish with trim.
measure from Outside Brick Molding to OBM. Which is the frame around the actual perimeter of the window.
Use a UV light. The blood stain will appear black.
To prevent water from leaking through your window frame, you can apply caulk around the edges of the frame to seal any gaps or cracks. Additionally, installing weatherstripping or a drip cap above the window can help redirect water away from the frame. Regularly inspecting and maintaining the window seals can also help prevent leaks.
The best way to detect blood is with a very strong black light. Holding the light over a window frame will expose any bodily fluids, but it may not be possible to tell exactly what it is.