answersLogoWhite

0

Last week the linkage on my wiper let go....removing the plastic to get at is not for the faint at heart. It involves removing the wiper arms, which is the only hard part but its a pain. The wiper arms are splined on, and held on with clips underneath, they have to be pryed off, and then lined up PERFECTLY afterwards. Other than the wiper arms, there are a few small screws in the pastic, and the washer lines are attached to this piece, so watch out that you dont break them off.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

How do you replace windshield wipers on a 93 buick lesabre?

In order to replace the windshield wipers on a 93 Buick Lesabre, you simply need to remove the wipers from the car. You have to buy new ones, and then attach the new ones on to the car.?æ


What size windshield Wipers for Buick Park Avenue 1997?

22"


Where does the water come out of the windshield washer on your 1995 Buick Skylark.?

From hoses attached to the wipers.


Why do the Windshield wipers not shut off unless I turn the car off on my 2002 Buick Rendezvous?

It may be a bad wiper switch


Why would the windshield wipers suddenly stop working on a 2000 Buick Park Avenue?

It needs to be checked out . There are many things that can go wrong.


How do you fix windshield wipers up on a 2000 Buick Regal that park in the up position?

Could be out of synk need to loosen and reset then tighten back up


How much do windshield wipers cost for buick century?

As little as $5 a piece and as much as $35 a piece. See sources and related links below for more information.


How do you fix timing on windshiel wipers for 02 Buick regal?

how do you fix timing on wipers 2000 buick regal


What sensor is in the plastic intake manifold on a 1997 Buick le Sabre 3.8l?

That should be the Oxygen Sensor


Where is the MAP sensor located on a 96 Buick LeSabre?

Passenger side of black plastic intake plenum.


1998 buick park avenue windshield wipers park too high on windshield when turned off Any idea why?

you can take each one off at the base ,where they turn at there connection and ajust them that way ,or go to a g m dealership to let them help you


How do you replace wipers 2000 Buick Park Avenue?

To replace the wipers on a 2000 Buick Park Avenue, first lift the wiper arms away from the windshield. Next, locate the release tab on the wiper blade where it connects to the arm, press the tab, and slide the old blade off. Align the new wiper blade with the arm and slide it into place until you hear a click. Finally, gently lower the wiper arm back onto the windshield.