You go the broken robot you first see. Then you have to get it working gain, so you have to put the red gear first, green, green, green, then red. Spin the gears and then you will get the multi tool.
you talk to the robot in the clockwork Catina.
you go all the way to the top where the gear is than use the multi tool if you don't have the multi tool than just go to the cantina in the beginning of steam works island
i dont know but ive got the steam battery multi tool and dirty beaker
There are a variety of functions on the handheld tool known as the Leatherman Multi Tool. It works as bottle opener, a screwdriver, needle nose pliers, wire cutter and stripper.
you have to use the multi tool for a wheel to stop the fan so that sprocket can unlock the door for you. if you want to know more look on you tube:)
The skylight is on the Center/Museum building to the immediate right of the Cantina.To enter Mayor Crumb's office1) Get the multi-tool from the Clockwork Cantina2) Pull the lever on the Cantina3) Cross the extension arm to the Center4) Use the steam exhausts to carry you to the roof, and over to the right side5) Use the multi-tool to open the skylight bolts
go on the roof and turn the wheel with your multi-tool.
All you have do is go to the top of some building(which you will find) and then you should see a small glass dome thingy and then use the multi-tool and then it opens!!
Where a gear is not turned by hand, you would use the Multi-Tool, available at the Cantina when you enter the island.
Just to your right is the Clockwork Cantina. Place the gears on the mounts inside, the big ones at top and bottom and the little ones between them. Turn the crank to receive the Multi-Tool. In the trash farther right is the Steam Battery, which you can use to open the doors on the island once you have the keys.
The Steam Generator (to open the doors) is in the trash bin to the right of the Cantina.
At the Clockwork Cantina where you enter the island, put the gears into their proper places and turn the crank to dispense a Multi-Tool. The two large gears go at the top and the bottom, on the pivots there, and the three small gears connect them down the center.