To remove the shift handle from a 1996 GMC Jimmy, start by locating the set screw or retaining clip at the base of the handle. Use a small screwdriver or Allen wrench to loosen or remove the screw. Once it's loose, gently pull the shift handle upward to detach it from the shifter shaft. If it resists, check for any additional clips or screws that may need to be addressed.
There is a small clip on the side of the leather handle. Pull this clip out, then the shift handle will come off.
There is none.
There isn't a fuel shutoff valve.
Built into the fuel pump
You don't.
Turn it to the left, it screws off.
pull out the little black clip on the front and lift the handle off.
chevorlet and GMC are the same. as long as your using 4.3 with 4.3 and so on
KEY ON ENGINE OFF.... 60-66 PSI
bent pulley
check the fuse Have the vehicle scanned to determine the problem
take the door panel off to expose speaker