The voltage of 277 volts is the wye of a three phase 480 volt system. Just as the voltage of 347 is the wye voltage of a three phase 600 volt system. To obtain these voltages for any three phase system, take the three phase voltage and divide it by 1.73. 480/1.73 = 277 volts, 600/1.73 = 347 volts.
The voltage of a 277 volt lighting circuit is 277 volts. The equation that is used to find what the three phase four wire source supply is as follows; use the line to neutral voltage times the square root of 3. 277 x 1.73 = 480 volts. Likewise if you have the three phase four wire line to line voltage and you want to know what the line to neutral is, use this equation 480 / 1.73 = 277. Other common three phase four wire voltages are 600 volts / 1.73 = 347 volts, 415 volts / 1.73 = 240 volts and 208 volts / 1.73 = 120 volts.
A transformer through its windings creates the voltage necessary. they make step down and step up Transformers which are sized in Kva which would be determined depending on each individuals needs. So circumstance specific.
277 v is the line-to-neutral voltage of a 480 v three-phase supply.
match single phase power to three phase power
With a step up transformer.
With a step up
The voltage drop should not exceed 3% on a feeder or branch circuit.
Question is incorrect. in a 240 Volt single phase circuit, how can you have A phase and B phase?
Yes there is single phase for 600 volts. It is used for lighting. You need a transformer which gives you 600 volts plus a neutral. The voltage for the one phase to neutral is 347.
The voltage you are referring to is a 'line-to-line' voltage ('line voltage'), as there is no such thing as a 'phase-to-phase' voltage.480 volts. In real life, the voltage will vary slightly by up to 3% (14 V) on a properly sized circuit. Line to neutral will measure 277 volts, plus or minus 3%.
Not enough information. To answer this question the amount of current in AMPS the circuit is drawing is needed.
with 3 phase lighting you do not have to use as large of wire and can use one neutral for every 3 current carrying conductors so it cut down on material costs ( as voltage increases current decreases) <<>> The voltage 277 is the star-point voltage of a 480 volt three phase system. By using a 480 volt wye system you have the dual ability of running 480 volt three phase equipment along with 277 volt lighting. The side advantage is the ability of using the phase voltage to ground (neutral) 480 / 1.73 = 277 volts for general lighting of the building the 480 volt equipment is located in.
480 Volt
The voltage drop should not exceed 3% on a feeder or branch circuit.
Question is incorrect. in a 240 Volt single phase circuit, how can you have A phase and B phase?
Yes there is single phase for 600 volts. It is used for lighting. You need a transformer which gives you 600 volts plus a neutral. The voltage for the one phase to neutral is 347.
let me clear difference between phase voltage and line voltage. phase voltage is measure line to neutral and line voltage is measure line to line.there is correct answer that 380 volt is sum of multiply of square root 3 to phase voltage 220 volt.phase volt line volt220 volt x 1.732 = 381 volt230 volt x 1.732 = 400 volt240 volt x 1.732 = 415 voltM. Asif ALi
The voltage you are referring to is a 'line-to-line' voltage ('line voltage'), as there is no such thing as a 'phase-to-phase' voltage.480 volts. In real life, the voltage will vary slightly by up to 3% (14 V) on a properly sized circuit. Line to neutral will measure 277 volts, plus or minus 3%.
The voltage of 277 volts is the wye voltage of a three phase 480 volt distribution. In the 480 volt CDP (Central Distribution Panel), you will need a 600 volt rated single pole 15 amp breaker installed in the CDP. The load will be connected to the output terminal of the breaker and the other conductor will be connected to the neutral bus in the CDP. The minimum size conductor for the 15 amp circuit will be a #12 copper conductor.
Yes, if the motor is rated 240 volts 3 phase.There is such a thing as 240 volt 3 phase power.However if you are asking if you can use 240 volts single phase on a three phase motor, then the answer is no.
Not enough information. To answer this question the amount of current in AMPS the circuit is drawing is needed.
A 277 volt lighting fixture is one that is usually used in an industrial application. The reason for this is the voltage rating. A voltage potential of 277 volts is the voltage to neutral (ground) of a three phase four wire 480 volt distribution system. 480 volts / 1.73 = 277 volts. Rather than having to add a transformer to the system to provide 120 volts for lighting, manufactures produced a ballast for fluorescent fixtures that operates on the 227 volt potential.
It depends on the use it is being put to. It is sufficient for a 24 volt circuit. Too much for a 12 volt circuit and too little for a 240 volt circuit.