Want this question answered?
3rd brake light or rear brake lights?
See sources and related links below for the brake lamp and light bulb list information.
The brake light bulb on a 2007 Cadillac CTS can be replaced by opening the truck, removing the rear cover, and disconnecting the wiring harness. The bulb can then be twisted, removed, and a new bulb put in its place.
trying to install bulb in 2007 maxima need info on how to
3057 See sources and related links below for 2007 Chrysler Sebring complete light bulb list.
The "BRAKE BULB" light means that a brake bulb is not working and may require replacing.
The third brake light on a 2007 Toyota Avalon is replaced by first removing the rear, retaining screws. The wiring harness can then be disconnect and the light bulb removed.
its like changing a light bulb and depends on the car model 2007 volkswagen beetle
2007 GMC Sierra brake light bulb replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
2007 Hyundai Elantra brake light bulb replacement: Purchase the correct replacement brake light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement brake light bulb information. Then consult your owner's manual for the replacement procedure. As simple as it sounds, the owner's manual is the best place to start for brake light bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Open the truck and remove the two fasteners (left or right side) that secure the bungee net. This will allow the carpet liner to be pulled forward to access the brake/running light bulb. Twist the bulb socket to remove the bulb.
bulb # for brake light on your explorer is a 3157 backup light bulb # is 3156 hope this helps