Want this question answered?
There is no interior fuse panel. The panel is in the engine compartment behind the airfilter
there are 2 one behind the battery the other under the dash panel driver side
No.
The 2007 Chrysler PT Cruiser OBD 2 port is under driver side dash next to kick panel
No the tank has to b e removed.
The rear door panel on a PT Cruiser can easily be removed by unscrewing the screws at the top and bottom. The exact location of the screws can be found in the user manual.
The "PT" in "PT Cruiser" stands for "Personal Transportation," as expressed at the 2002 PT Cruiser owners event at the Chrysler Headquarters in Auburn Hills Michigan. The event included a question and answer session with Chrysler Engineers from the PT Cruiser team where this question was raised and addressed. It does NOT stand for "Panel Cruiser" as the "woody" panel look was not added as factory option until a couple of years after the vehicles launch.
Removing the interior rear door panel from the 2002 Chrysler PT Cruiser involves locating and removing the six screws covered with plastic covers. Once these are removed, the door cover can be gently pried off.
drivers side footwell behind panel by bonnet release lever drivers side footwell behind panel by bonnet release lever
It is behind the panel at the rear passenger side of the interior.It is behind the panel at the rear passenger side of the interior.
The fuse panel is located in either the drivers end of the dash behind a panel, or behind the door on the drivers side that opens like an ashtray. There is a diagram on the inside of the panel showing the location of the stereo fuse.
Open the drivers door , on the drivers end of the dash you will see a removable plastic panel , the fuse panel is behind the plastic cover panel