If you want to get to the top break light then you should visit the Auto Parts Warehouse.
tighten brake switch located on top of brake pedal under dash adjust so lamps are out and come on with light pressure on pedal.
at the top of the break pedal its a little black plastic box with wires in it.
Take off the sopiler four scrows on top, two scrows on each side, then open two scrows on top of the middle break light and pull out the light and twist the blub to left.
signal and break light don't come on
Check the brake light fuse and the bulbs.
The brake indicator light is for the EMERGENCY break, release this break.
No light goes on in your car when you press the break but when you press the break the street light color you see is RED
The break light switch is located on the backside of the break peddle arm.
On my 94 ranger its on the break pedal (towards the top) its pretty easy to replace I have changed 3 times in 12 years
sounds like bad break light switch. your break pedal has a switch that turns on your break lights when you press on your breaks and off when you take your foot off the pedal.
What years did they make the 38 top break revolver? How can you know how old one is?
Open the liftgate and remove the ( 2 ) screws at the top of the tail light Carefully work the tail light straight back towards you because it's held in place by plastic pins >>>>>>>>>> and you don't want to break any of those