I would ... were this properly dated. As it is, I have no idea if the problem's been fixed ... years ago.
Ps. i've had this same problem ... so I have some clues.
I hate non-dated posts.
how do i repair 1997 nissan maxima wiper linkage
The 1999 Nissan windshield wiper linkage is held in place by three retaining nuts. Remove the retaining nuts and the linkage will come free. Replace the linkage with new linkage.
Below
Diagram replacement linkage for wipers 2000 Nissan Xterra.
You have to remove the linkage from the wiper motor.
Windshield wipers not working on a 1995 Nissan sentraTry the panel between the hood and the windshield. that is where the linkage is located. I have had problems where the linkage has broken. and the wiper will not work at all
Nissan Stanza was created in 1977.
If one wants to replace a wiper linkage there are a few steps involved. Pull the wiper arm away from the windshield until the arm locks in vertical position. Unbolt the nut that holds the wiper arm to the linkage and pull the wiper arm off the linkage. Open the hood and unbolt the wiper motor and slide the motor off of the linkage. One then will remove the wiper linkage and install a new one.
# Remove the windshield wiper arms # Remove the cowl cover # Disconnect the electrical connector from the wiper motor # Detach the wiper motor/linkage assembly from the cowl # Remove the wiper motor retaining bolts and remove the motor
* Remove the windshield wiper arms * Remove the cowl cover * Disconnect the electrical connectorr from the wiper motor * Detach the wiper motor/linkage assembly from the cowl * Remove the wiper motor retaining bolts and remove the motor
Images of the wiper linkage for a Dodge Dakota are located in the service manual. It details where the linkage connects and how to perform maintenance on it.
As long as they are both mk4 jettas the wiper linkage should fit. If you need to purchase the wiper linkage. Check out this website. http://twinlys.weebly.com